Read Sony XAV-V630BT Service Manual online
XAV-V630BT
19
3-4. VOL KNOB ASSY, KEY BOARD
–
Front panel block rear view
–
5 screw
(K
M2
u 3.5)
5 screw
(K
M2
u 3.5)
5 two screws
(K
M2
u 3.5)
7 claw
9 Draw the wire out from the hole
of the KEY board.
8 Remove the BT ANT wire from
the groove of the KEY board.
7 four claws
1 VOL knob assy
3 touch panel flexible board
4 LCD flexible board
6 screw
(B2
u 8)
6 two screws
(B2
u 8)
2 connector
colored line
Insert straight into the interior.
flexible flat
cable
cable
connector
OK
colored line
Insert at a slant.
flexible flat
cable
cable
connector
NG
How to install the flexible flat cable
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
KEY board
E7
Insert is shallow
Insert is straight
to the interior.
to the interior.
Note 2: When installing the connector, please
install them correctly.
There is a possibility that this machine
damages when not correctly installing it.
Wire setting
OK
NG
hole
groove
0 KEY board
Note
3: When the KEY board is replaced, refer to
“FLICKER ADJUSTMENT” on page 22.
Note 1: When the VOL knob assy is replaced, Bluetooth information
writing is necessary. Refer to “BLUETOOTH INFORMA-
TION WRITING METHOD” on page 6. (Except IND and
IND2)
TION WRITING METHOD” on page 6. (Except IND and
IND2)
Click on the first or last page to see other XAV-V630BT service manuals if exist.