Read Sony XAV-742 Service Manual online
XAV-742
12
Note: Follow the disassembly procedure in the numerical order given.
3-2. FRONT PANEL BLOCK
3 hook
4 roller
4 roller
3 hook
6 LID (DISPLAY) board
7 flexible printed wiring board (60 pin)
(CN7301)
8 front panel block
front panel block
5 two screws
(PTW
S2
u 5)
2 screw
(Z
M2
u 3)
2 screw
(Z
M2
u 3)
Insert is shallow
Insert is straight
to the interior.
to the interior.
connector
Insert is incline
flexible flat cable
flexible flat cable
flexible flat cable
connector
connector
NG
OK
NG
Note 2: When you install the flexible flat cable, please install them
correctly. There is a possibility that this machine damages
when not correctly installing it.
1 Turn the power on and press the eject button
to open the front panel block.
Note
1: When drawing out the front panel, fundamentally
turn on the power and press the Eject button to open.
Draw it out manually only if it does not move though
the Eject button is pressed. (You will feel heavy because
the clutch is engaged with the drive block. Be careful
about this operation as the drive block or other parts
could be deformed.)
Click on the first or last page to see other XAV-742 service manuals if exist.