Read Sony XAV-722 / XAV-72BT / XAV-E722 Service Manual online
XAV-72BT/722/E722
15
Face the hook inwards.
Precautions
Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperature, such as in
direct sunlight or near heater ducts.
Use only the supplied mounting hardware for a safe and
secure installation.
To open/close the front panel smoothly, insert/eject a
disc easily, and especially to drive safely, a certain
distance between the front panel and the shift lever is
necessary. The necessary distance differs, depending on
the shift lever position of your car. Before installing the
unit, choose the installation location carefully so that
you can drive safely.
unit will not interfere with normal driving operations.
Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperature, such as in
direct sunlight or near heater ducts.
Use only the supplied mounting hardware for a safe and
secure installation.
To open/close the front panel smoothly, insert/eject a
disc easily, and especially to drive safely, a certain
distance between the front panel and the shift lever is
necessary. The necessary distance differs, depending on
the shift lever position of your car. Before installing the
unit, choose the installation location carefully so that
you can drive safely.
87.8 mm
(3
(3
1
/
2
in)
Shift lever
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake
lead
lead
Be sure to connect the parking brake lead (light green) of
the power supply connection cable
the power supply connection cable
to the parking
brake switch cord. The mounting position of the parking
brake switch cord depends on your car. Consult your car
dealer or your nearest Sony dealer for further details.
brake switch cord depends on your car. Consult your car
dealer or your nearest Sony dealer for further details.
Removing the bracket
Before installing the unit, remove the bracket
from the unit.
from the unit.
1
Insert both release keys
together between
the unit and the bracket
until they click.
2
Pull down the bracket
, then pull up the unit
to separate them.
Mounting the unit
-A Mounting the unit with the supplied
bracket
1
Position the supplied bracket (
) inside the
dashboard.
2
Bend the claws outward for a tight fit.
3
Mount the unit onto the supplied bracket (
).
Note (
-A-2)
Bend these claws outward for a tight fit.
-B Mounting the unit in a Japanese car
You may be able to install this unit in some makes of
Japanese cars without the supplied bracket. If you cannot,
consult your Sony dealer.
Japanese cars without the supplied bracket. If you cannot,
consult your Sony dealer.
When mounting this unit to the preinstalled brackets of
your car, use the supplied screws
your car, use the supplied screws
in the appropriate
screw holes, based on your car: T for TOYOTA, M for
MITSUBISHI and N for NISSAN.
MITSUBISHI and N for NISSAN.
Notes
To avoid a malfunction, install only with the supplied screws
.
Do not apply excessive force to the buttons of the unit.
Do not press on the LCD.
Before mounting, make sure there is nothing on the top of the unit.
Do not press on the LCD.
Before mounting, make sure there is nothing on the top of the unit.
Foot brake type
Parking brake switch cord
Hand brake type
Parking brake switch cord
Warning if your car’s ignition
has no ACC position
has no ACC position
Be sure to set the Auto Off function. For details, refer to
the supplied “Operating Instructions.”
The unit will shut off completely and automatically in the
set time when no source is selected, which prevents
battery drainage.
If you do not set the Auto Off function, press and hold
the supplied “Operating Instructions.”
The unit will shut off completely and automatically in the
set time when no source is selected, which prevents
battery drainage.
If you do not set the Auto Off function, press and hold
until the display disappears each time
you turn the ignition off.
Reset button
When the installation and connections are completed, be
sure to press the reset button with a ballpoint pen, etc.
sure to press the reset button with a ballpoint pen, etc.
Dashboard
Claws
2
3
1
A
B
Larger than 182 mm (7
1
/
4
in)
Larger than 111 mm (4
3
/
8
in)
To the dashboard/center console
Bracket
Parts supplied with your car
Size:
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
Size:
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
Bracket
Click on the first or last page to see other XAV-722 / XAV-72BT / XAV-E722 service manuals if exist.