Read Sony XAV-701HD (serv.man2) Service Manual online
XAV-701HD
5
6 SERVO board
23IOH[LEOHERDUGVHWWLQJ
OK
NG
adhesive (ST-854GH) tape
NG
NG
OK
Insert is shallow
Insert is straight
to the interior.
to the interior.
Insert is incline
connector
flexible borad
flexible borad
flexible borad
connector
connector
Note 6: When installing the flexible board, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Note 7: When installing the OP flexible board,
Do not touch this portion.
Note 9: Check that OP flexible board is not
caught in a lever (lock B).
lever (lock B)
lever (lock B)
Note 8: Arrange OP flexible board
under the chassis at this part.
1 adhesive (ST-854GH)
tape
4 two toothed lock screws
(M1.7
u 2.5)
5 claw
SERVO board
SERVO board
OP flexible board
OK
NG
Solder remains.
Note 5: Check that solder
does not remain
in solder points.
Note 4: When assembling the SERVO board, remove the solder
of short-land after connecting the OP flexible board.
2 Solder the short-land.
Note
3: When solder the short-land, be sure to refer to
“NOTE FOR FLEXIBLE BOARD OF THE
OPTICAL PICK-UP” of the servicing notes
(See page 2).
3 OP flexible board
(CN2)
OP flexible board
A
A
±'9'PHFKDQLVPGHFNEORFNERWWRPVLGHYLHZ±
Note 2: Adhesive (ST-854GH) tape cannot
re-used. Please replace to brand-new
part ones adhesive (ST-854GH) tape
is
removed.
2-3. SERVO BOARD-2
Note 1: Before disconnecting the OP fl exible board, solder the short-land.
Click on the first or last page to see other XAV-701HD (serv.man2) service manuals if exist.