MEX-DV1700U, MEX-DV1707U - Sony Car Audio Service Manual (repair manual). Page 8

Read Sony MEX-DV1700U / MEX-DV1707U Service Manual online

MEX-DV1700U/DV1707U
8
TOYOTA
NISSAN
to dashboard/center console
Bracket
Bracket
Existing parts supplied with your car
size  
5 × max. 8 mm
(
7
/
32
 × max. 
5
/
16
 in)
size  
5 × max. 8 mm
(
7
/
32
 × max. 
5
/
16
 in)
to dashboard/center console
Bracket
Bracket
size  
5 × max. 8 mm
(
7
/
32
 × max. 
5
/
16
 in)
size  
5 × max. 8 mm
(
7
/
32
 × max. 
5
/
16
 in)
Existing parts supplied with your car
How to detach and attach the 
front panel  
Before installing the unit, detach the front panel.
-A  To detach
Before detaching the front panel, be sure to press and 
hold 
. Press the front panel release 
button, and pull it off towards you.
-B  To attach
Engage part 
 of the front panel with part  of the unit, 
as illustrated, and push the left side into position until it 
clicks.
Warning if your car’s ignition 
has no ACC position
Be sure to set the Auto Off function. For details, see the 
supplied Operating Instructions.
The unit will shut off completely and automatically in the 
set time after the unit is turned off, which prevents 
battery drain.
If you do not set the Auto Off function, press and hold 
 until the display disappears each time 
you turn the ignition off.
Fuse replacement
When replacing the fuse, be sure to 
use one matching the amperage 
rating stated on the original fuse. If 
the fuse blows, check the power 
connection and replace the fuse. If 
the fuse blows again after 
replacement, there may be an 
internal malfunction. In such a case, 
consult your nearest Sony dealer.
Precautions
 Choose the installation location carefully so that the 
unit will not interfere with normal driving operations.
 Avoid installing the unit in areas subject to dust, dirt, 
excessive vibration, or high temperatures, such as in 
direct sunlight or near heater ducts.
 Use only the supplied mounting hardware for a safe and 
secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake 
cord  
Be sure to connect the parking cord (Light green) of 
 
to the parking brake switch cord. The mounting position 
of the parking brake switch cord depends on your car. 
Consult your car dealer or your nearest Sony dealer for 
further details.
Removing the protection 
collar and the bracket  
Before installing the unit, remove the protection 
collar 
 and the bracket  from the unit.
Remove the protection collar 
.
Pinch both edges of the protection collar 
, then 
pull it out.
Remove the bracket 
.
  Insert both release keys  together between 
the unit and the bracket 
 until they click.
  Pull down the bracket , then pull up the unit 
to separate.
Mounting example  
Installation in the dashboard
Notes 
 Bend these claws outward for a tight fit, if necessary (-2).
 Make sure that the 4 catches on the protection collar  are properly 
engaged in the slots of the unit 
(-3).
Mounting the unit in a 
Japanese car  
You may not be able to install this unit in some makes of 
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws 
.
Face the hook inwards.
1
2
3
Dashboard
Fire wall
Claws
1
2
Front panel release button
Fuse (10 A)
Foot brake type
Parking brake switch cord
Hand brake type
Parking brake switch cord
A
B
Page of 55
Display

Click on the first or last page to see other MEX-DV1700U / MEX-DV1707U service manuals if exist.