Read Sony MEX-1HD Service Manual online
6
MEX-1HD
Ver 1.1
stand
2 cm
NOTE FOR THE OPENING OF THE FRONT PANEL
In this set, the front panel is lowered to below the bottom face
when it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
when it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
JIG ON REPAIRING
When repairing this set, connect the extension cables as the figure
shown below.
shown below.
Connect jig (extension cable J-2502-069-2 :
0.5mm Pitch, 50 cores, Length 300mm)
to the main board (CN3002) and
the sub board (CN526).
0.5mm Pitch, 50 cores, Length 300mm)
to the main board (CN3002) and
the sub board (CN526).
Connect jig (extension cable J-2502-069-1 :
24 cores) to the power board (CN702) and
the sub board (CN525).
24 cores) to the power board (CN702) and
the sub board (CN525).
sub board (CN525)
sub board (CN526)
mechanism deck
front panel section
Connect jig (extension cables J-2502-069-3 :
0.5mm Pitch, 20/40 cores, Length 250mm)
to the mechanism deck and the main board
(CN2002, CN2003).
0.5mm Pitch, 20/40 cores, Length 250mm)
to the mechanism deck and the main board
(CN2002, CN2003).
main board (CN3002)
main board (CN2003)
main board (CN2002)
power board (CN702)
Click on the first or last page to see other MEX-1HD service manuals if exist.