CX-LEMV300, XR-EMV300 - Sony Car Audio Service Manual (repair manual). Page 13

13

Procedure:
1. Extract an AC plug.
2. While depressing the  TAPE N  button, insert an AC plug.
3. The message “TC TEST” is displayed and TC test mode is

activated.

*

Zero Return

1. Press the  M >  or  .m  button.
2. The tape is rewound to the counter zero position.
*

Automatic record/playback test

1. Press  the  REC START/REC PAUSE  button.
2. The message “AUX” is displayed and AUX input is selected.
3. The tape is rewound to the counter zero position and recording

is started automatically.

4. When the  CLEAR x  button  is pressed, the tape is rewound

to the recording stated point and the set starts playback.

5. To exit from this mode, press the  POWER  button or disconnect

the power cord.

•

1. Clean the following parts with a denatured alcohol-moistened

swab:

record/playback heads

pinch rollers

erase head

rubber belts

capstan

idlers

2. Demagnetize the record/playback head with a head demagne-

tizer.

3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the

parts adjusted.

5. The adjustments should be performed with the rated power

supply voltage unless otherwise noted.

2.94 mN • m to 7.84 mN • m

31 to 71 g • cm

(0.43 – 0.98 oz • inch)

0.14 mN • m to 0.59 mN • m

2 to 6 g • cm

(0.02 – 0.08 oz • inch)

6.86 mN • m to 17.64 mN • m

71 to 143 g • cm

(0.98 – 1.99 oz • inch)

more than 0.98 N • m

100 g or more

(3.53 oz or more)

CQ-102C

CQ-102C

CQ-201B

CQ-403A

FWD

FWD
back tension

FF/REW

FWD tension