Read Sony CDX-R30M / CDX-R3310 / CDX-R3410 / CDX-R3410S Service Manual online
5
CDX-R30M/R3310/R3410/R3410S
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
• CDX-R3410/R3410S
• LOCATION OF CONTROL
• CDX-R30M/R3310
6
Location of controls and basic operations
Main unit
Card remote commander RM-X151
(CDX-R3310 only)
ATT
OFF
SOURCE
MODE
SEL
SEEK
1
2
3
4
5
6
SENS
REP
BTM
– GP/DISC +
SHUF
LIST
SCRL
DSPL
DIM
EQ3
OPEN
SEEK
CAT
1 2
3
4
5
6
7
8
CDX-R30M
9
0 qa qs qd
qf
qg
qh qj qk
ql
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
2
3
7
0
qa
qs
qj
w;
wa
wd
ws
7
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a
Volume +/– button
To adjust volume.
b
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
c
DSPL (display)/DIM (dimmer) button
4, 8, 10
4, 8, 10
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
d
OPEN shutter, disc slot
(located behind
the shutter)
5
e
Display window
f
EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
g
OFF button
To power off/stop the source.
h
SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
i
(front panel release) button 4
j
SOURCE button
To power on/change the source (Radio/CD/
MD*
MD*
1
).
k
MODE button 8, 11
To select the radio band (FM/AM)/select the
unit*
unit*
2
.
l
SEL (select) button 4, 9, 10
To select items.
m
RESET button
(located behind the front
panel)
4
n
Frequency select switch
(located on the
bottom of the unit) (CDX-R30M only)
See ìF requency select switchî i n the
supplied installation/connections manual.
See ìF requency select switchî i n the
supplied installation/connections manual.
o
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1
:
(1)/(2):
GP
*
3
/
DISC
*
2
–/+
To skip groups (press); skip groups
continuously (press and hold).
(3):
continuously (press and hold).
(3):
REP 8
(4):
SHUF 8
p
SENS/BTM button 8
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
(press); start the BTM function (press and
hold).
q
SCRL button 8
To scroll the display item.
r
LIST/CAT
*
4
button 9, 11
To list up.
s
Receptor for the card remote
commander
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
t <
(
.
)/
,
(
>
) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
u
VOL +/– button
To adjust volume.
v M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
w
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*1
When an MD changer is connected.
*2
When a CD/MD changer is connected.
*3
When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 11.
is not connected. If the changer is connected, the
operation is different, see page 11.
*4
When the XM tuner is connected.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
6
Location of controls and basic operations
Main unit
Card remote commander RM-X151
ATT
OFF
SOURCE
MODE
SEL
SEEK
1
2
3
4
5
6
SENS
REP
BTM
– GP/DISC +
SHUF
LIST
SCRL
DSPL
DIM
EQ3
OPEN
SEEK
1 2
3
4
5
6
7
8
CDX-R3410S
CDX-R3410
CDX-R3410
9
0 qa qs qd
qf
qg
qh qj qk
ql
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
2
3
7
0
qa
qs
qj
w;
wa
wd
ws
7
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a
Volume +/– button
To adjust volume.
b
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
again.
c
DSPL (display)/DIM (dimmer) button
4, 8, 10
4, 8, 10
To change display items (press); change the
display brightness (press and hold).
display brightness (press and hold).
d
OPEN shutter, disc slot
(located behind
the shutter)
5
e
Display window
f
EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
g
OFF button
To power off/stop the source.
h
SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
i
(front panel release) button 4
j
SOURCE button
To power on/change the source (Radio/CD/
MD*
MD*
1
).
k
MODE button 8, 11
To select the radio band (FM/AM)/select the
unit*
unit*
2
.
l
SEL (select) button 4, 9, 10
To select items.
m
RESET button
(located behind the front
panel)
4
n
Frequency select switch
(located on the
bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
See “Frequency select switch” in the
supplied installation/connections manual.
o
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1
:
(1)/(2):
GP
*
3
/
DISC
*
2
–/+
To skip groups (press); skip groups
continuously (press and hold).
(3):
continuously (press and hold).
(3):
REP 8
(4):
SHUF 8
p
SENS/BTM button 8
To improve weak reception: LOCAL/MONO
(press); start the BTM function (press and
hold).
(press); start the BTM function (press and
hold).
q
SCRL button 8
To scroll the display item.
r
LIST button 9, 11
To list up.
s
Receptor for the card remote
commander
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
commander have also different buttons/functions
from the unit.
t <
(
.
)/
,
(
>
) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
+/– on the unit. (For details of other
operations, see “With the card remote
commander” on each pages.)
u
VOL +/– button
To adjust volume.
v M
(+)/
m
(–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
the unit. (For details of other operations, see
“With the card remote commander” on each
pages.)
w
Number buttons
To receive stored stations (press); store
stations (press and hold).
stations (press and hold).
*1
When an MD changer is connected.
*2
When a CD/MD changer is connected.
*3
When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 11.
is not connected. If the changer is connected, the
operation is different, see page 11.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 14.
Click on the first or last page to see other CDX-R30M / CDX-R3310 / CDX-R3410 / CDX-R3410S service manuals if exist.