Read Sony CDX-GT820IP Service Manual online
CDX-GT820IP
4
SECTION 1
SERVICE NOTE
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
When repairing or servicing this set, connect the jig (extension
cable) as shown below.
• Connect the MAIN board (CN350) and the SERVO board
(CN401) with the extension cable (Part No. J-2502-076-1).
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (A-1362-921-A)
should be replaced since any parts in the SERVO board cannot be
repaired.
When repairing, the complete SERVO board (A-1362-921-A)
should be replaced since any parts in the SERVO board cannot be
repaired.
NOTE FOR THE 24-PIN CONNECTOR (CN901)
Do not use alcohol to clean the 24-pin connector (CN901) connect-
ing the front panel with the main body.
Do not touch the connector directly with your bare hand. Poor con-
tact may be caused.
Do not use alcohol to clean the 24-pin connector (CN901) connect-
ing the front panel with the main body.
Do not touch the connector directly with your bare hand. Poor con-
tact may be caused.
SERVO BOARD
CN401
CN401
MAIN BOARD
CN350
CN350
J-2502-076-1
Click on the first or last page to see other CDX-GT820IP service manuals if exist.