Read Sony CDX-GT522U / CDX-GT527U Service Manual online
CDX-GT522U/GT527U
12
Fuse replacement (
)
When replacing the fuse, be sure to use one matching the
amperage rating stated on the original fuse. If the fuse blows,
check the power connection and replace the fuse. If the fuse
blows again after replacement, there may be an internal
malfunction. In such a case, consult your nearest Sony
dealer.
amperage rating stated on the original fuse. If the fuse blows,
check the power connection and replace the fuse. If the fuse
blows again after replacement, there may be an internal
malfunction. In such a case, consult your nearest Sony
dealer.
Notes on the tuning step
For how to set the tuning step, see the supplied Operating
Instructions.
If replacing the car battery or changing the connections,
the tuning step setting will be erased.
Instructions.
If replacing the car battery or changing the connections,
the tuning step setting will be erased.
Mounting the unit in a Japanese
car (
car (
)
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws
To prevent malfunction, install only with the supplied screws
.
How to detach and attach the
front panel (
front panel (
)
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press and hold
. Press the front panel release button, and
pull it off towards you.
-B To attach
Engage part
of the front panel with part
of the unit,
as illustrated, and push the left side into position until it
clicks.
clicks.
Warning if your car’s ignition has
no ACC position
no ACC position
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in the
set time after the unit is turned off, which prevents battery
drain.
If you do not set the Auto Off function, press and hold
supplied Operating Instructions.
The unit will shut off completely and automatically in the
set time after the unit is turned off, which prevents battery
drain.
If you do not set the Auto Off function, press and hold
until the display disappears each time you
turn the ignition off.
°
(
)
English
Precautions
Choose the installation location carefully so that the unit
will not interfere with normal driving operations.
Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in direct
sunlight or near heater ducts.
Use only the supplied mounting hardware for a safe and
secure installation.
will not interfere with normal driving operations.
Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in direct
sunlight or near heater ducts.
Use only the supplied mounting hardware for a safe and
secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection collar
and the bracket (
and the bracket (
)
Before installing the unit, remove the protection collar
and the bracket
from the unit.
1
Remove the protection collar
.
Pinch both edges of the protection collar
, then
pull it out.
2
Remove the bracket
.
Insert both release keys
together between the
unit and the bracket
until they click.
Pull down the bracket
, then pull up the unit
to separate.
Mounting example (
)
Installation in the dashboard
Notes
Before installing, make sure that the catches on both sides of the
bracket
bracket
are bent inwards 2 mm (
3
/
32
in). If the catches are straight or
bent outwards, the unit will not be installed securely and may spring
out
out
( -1).
Bend these claws outward for a tight fit, if necessary
( -2).
Make sure that the 4 catches on the protection collar
are properly
engaged in the slots of the unit
( -3).
Bracket
Bracket
Bracket
Bracket
A
TOYOTA
B
NISSAN
to dashboard/center console
to dashboard/center console
Existing parts supplied with your car
Existing parts supplied with your car
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
5 ×
8 mm
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
5 ×
8 mm
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
5 ×
8 mm
size
5 × max. 8 mm
(
5 × max. 8 mm
(
7
/
32
× max.
5
/
16
in)
5 ×
8 mm
1
2
Face the hook inwards.
A
B
Fuse (10 A)
Front panel release button
Claws
2
3
1
Catch
182 mm (7
1
/
4
in)
53 mm (2
1
/
8
in)
Dashboard
Fire wall
Click on the first or last page to see other CDX-GT522U / CDX-GT527U service manuals if exist.