Read Sony CDX-GT300 / CDX-GT300EE / CDX-GT300S / CDX-GT30W / CDX-GT350 / CDX-GT350S / CXS-G3569FS Service Manual online
3
CDX-GT30W/GT300/GT300EE/GT300S/GT350/GT350S
•
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
This label is located on the bottom of the chassis.
• CD Playback:
You can play CD-DA (also containing CD TEXT*
1
), CD-R/CD-
RW (MP3 WMA files also containing Multi Session and ATRAC
CD (ATRAC3 and ATRAC3plus format).
CD (ATRAC3 and ATRAC3plus format).
Type of discs
Label on the disc
CD-DA
MP3
WMA
ATRAC CD
*1 A CD TEXT disc is a CD-DA that includes information such as
disc, artist and track name.
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
• Connect the MAIN board (CN350) and the SERVO board (CN2)
with the extension cable (Part No. J-2502-076-1).
SERVO BOARD
CN2
CN2
MAIN BOARD
CN350
CN350
J-2502-076-1
• Except US, CND model
Click on the first or last page to see other CDX-GT300 / CDX-GT300EE / CDX-GT300S / CDX-GT30W / CDX-GT350 / CDX-GT350S / CXS-G3569FS service manuals if exist.