Read Sony CDX-GS500R (serv.man2) Service Manual online
CDX-GS500R
2
2. DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
For Schematic Diagrams.
Note:
• All capacitors are in μF unless otherwise noted. (p: pF) 50
• All capacitors are in μF unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specifi ed.
• f : Internal component.
• C : Panel designation.
• C : Panel designation.
• A : B+ Line.
• B : B– Line.
• Power voltages is dc 14.4V and fed with regulated dc
• B : B– Line.
• Power voltages is dc 14.4V and fed with regulated dc
power supply from ACC and BATT cords.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : TUNER (FM)
< > : CD PLAY
• Voltages are taken with VOM (Input impedance 10 M
< > : CD PLAY
• Voltages are taken with VOM (Input impedance 10 M
).
Voltage variations may be noted due to normal production
tolerances.
• Signal path.
F :
F :
AUDIO
f :
TUNER
J :
CD
d :
USB
h :
SIRIUS/XM
E :
AUX
• Abbreviation
CND : Canadian model
CND : Canadian model
For Printed Wiring Boards.
Note:
• X : Parts extracted from the component side.
• Y : Parts extracted from the conductor side.
• f : Internal component.
•
• X : Parts extracted from the component side.
• Y : Parts extracted from the conductor side.
• f : Internal component.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
• Indication of transistor.
C
B
These are omitted.
E
Q
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• Abbreviation
CND : Canadian model
CND : Canadian model
Note: When the complete MAIN board is replaced, the desti-
nation setting is necessary. Refer to “NOTE THE MAIN
BOARD OR SYSTEM CONTROLLER (IC501) RE-
PLACING” on page 4 on original service manual.
BOARD OR SYSTEM CONTROLLER (IC501) RE-
PLACING” on page 4 on original service manual.
Note: When the complete MAIN board is replaced, the desti-
nation setting is necessary. Refer to “NOTE THE MAIN
BOARD OR SYSTEM CONTROLLER (IC501) RE-
PLACING” on page 4 on original service manual.
BOARD OR SYSTEM CONTROLLER (IC501) RE-
PLACING” on page 4 on original service manual.
Click on the first or last page to see other CDX-GS500R (serv.man2) service manuals if exist.