Read Sony CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV Service Manual online
CDX-G3000UE/G3000UP/G3000UV/G3050UP/G3050UV/G3070UV
5
TEST DISCS
Use following TEST DISC (for CD) when this unit confi rms the
operation and checks it.
Use following TEST DISC (for CD) when this unit confi rms the
operation and checks it.
Part No.
Description
3-702-101-01 DISC
(YEDS-18),
TEST
4-225-203-01 DISC
(PATD-012),
TEST
NOTE OF REPLACING THE KEY BOARD
When the KEY board is defective, replace the FRONT PANEL
OVERALL ASSY (Ref. No. FP1).
When the KEY board is defective, replace the FRONT PANEL
OVERALL ASSY (Ref. No. FP1).
1-4. Destination Code
Model
Destination OP5 OP4 OP3 OP2 OP1 OP0
CDX-G3000UE
Russian
8
8
1
0
9
7
CDX-G3000UP
US, Canadian
0
A
1
0
7
2
CDX-G3000UV
AEP, UK
0
8
1
0
8
1
CDX-G3050UP
Australian
0
A
1
8
B
0
CDX-G3050UV
E, Mexican
0
8
1
8
A
0
Saudi Arabia
0
8
1
8
A
4
CDX-G3070UV
Indian
1
8
1
8
C
0
2. Confi rmation After Destination Setting
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Execute the following operation after completing the destination
setting, and confi rm a correct destination was set.
Destination setting checking method:
1. In the state of source off (the clock is displayed on the liquid
1. In the state of source off (the clock is displayed on the liquid
crystal display), enter the test mode by pressing the buttons in
order of the [SHUF 4] t [5] t [PAUSE 6] (press only the
order of the [SHUF 4] t [5] t [PAUSE 6] (press only the
[PAUSE 6] button for two seconds).
2. In the state in which the system controller version is displayed
on the liquid crystal display (refer to following fi gure), enter
the destination setting value display mode by pressing the [
the destination setting value display mode by pressing the [
SCRL DSPL] button.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
System controller version
SHUF
3. Confi rm the alphanumeric character of 12 digits in liquid crys-
tal display is an value correctly input.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
Destination code
12 digit
OP5 OP4 OP3 OP2 OP1 OP0
SHUF
4. The resetting operation is executed by pressing the [
OFF
SRC] button for 1 second after the confi rming ends, and the
unit returns to the normal condition.
unit returns to the normal condition.
(CDX-G3000UP/G3050UP/G3050UV/G3070UV only)
Replacing the lithium battery of the
remote commander
remote commander
When the battery becomes weak, the range
of the remote commander becomes shorter.
Replace the battery with a new CR2025
lithium battery. Use of any other battery may
present a risk of fire or explosion.
of the remote commander becomes shorter.
Replace the battery with a new CR2025
lithium battery. Use of any other battery may
present a risk of fire or explosion.
Notes on the lithium battery
ˎ Keep the lithium battery out of the reach of
ˎ Keep the lithium battery out of the reach of
children. Should the battery be swallowed,
immediately consult a doctor.
immediately consult a doctor.
ˎ Wipe the battery with a dry cloth to assure a good
contact.
ˎ Be sure to observe the correct polarity when
installing the battery.
ˎ Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Cleaning the connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
detach the front panel (page 5) and clean the
connectors with a cotton swab. Do not apply
too much force. Otherwise, the connectors
may be damaged.
connectors between the unit and the front
panel are not clean. In order to prevent this,
detach the front panel (page 5) and clean the
connectors with a cotton swab. Do not apply
too much force. Otherwise, the connectors
may be damaged.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose
of in fire.
Do not recharge, disassemble, or dispose
of in fire.
+ side up
Notes
ˎ For safety, turn off the ignition before cleaning
ˎ For safety, turn off the ignition before cleaning
the connectors, and remove the key from the
ignition switch.
ignition switch.
ˎ Never touch the connectors directly with your
fingers or with any metal device.
and clean the
Ver. 1.2
Click on the first or last page to see other CDX-G3000UE / CDX-G3000UP / CDX-G3000UV / CDX-G3050UP / CDX-G3050UV / CDX-G3070UV service manuals if exist.