Read Sony CDX-434RF / CDX-530RF / CDX-535RF Service Manual online
19
SECTION 4
MECHANISM DECK ASSEMBLY
Note:
Follow the assembly procedure in the numerical order given.
OPTICAL PICK-UP COMPLETE ASS’Y
chuck plate
1
Move the lever (LOCK 3A) in the direction of the arrow
A
,
and return it a little in the direction of the arrow
B
from the position where the chuck plate is moved
down to the lower limit.
down to the lower limit.
A
B
3
stop ring 2.0 (E type)
4
tension spring (DH)
2
optical pick-up complete ass’y
Note: Insert the shaft (A) first.
Note: Insert the shaft (A) first.
shaft (A)
gear (LOAD 2)
gear (LOMINI)
marking
Fig. A
Fig. A
chuck plate
2
Attach the gear (LOMINI) at the position
shown in Fig. A.
shown in Fig. A.
shaft (rotary prevention C)
1
Move the lever (LOCK 3A)
fully in the direction of the arrow
fully in the direction of the arrow
B
to move the chuck plate up.
B
4
stop ring 1.5 (E type)
3
Attach the gear (LOAD 1) ass’y
with its facing inside.
with its facing inside.
slit
GEAR (LOMINI)/(LOAD 1) ASS’Y
Click on the first or last page to see other CDX-434RF / CDX-530RF / CDX-535RF service manuals if exist.