Read Sony ZS-S2IP Service Manual online
ZS-S2iP
6
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
• BASIC OPERATIONS
V
VOLUME + qa have a tactile dot.
OLUME + qa and
u 8 have a tactile dot.
Playing the iPod
1
2
Press iPod qs (direct power-on).
“DC OUT” appears in the display (AC only).
“DC OUT” appears in the display (AC only).
Press
u
8.
The iPod begins to play.
You can operate the connected iPod by the unit or the
iPod buttons.
iPod buttons.
To
Press
Pause playback
u
8
To resume play, press it again.
Stop playback
x
8
Go to the next
track
track
>
6
Go back to the
previous track
previous track
.
6
Locate a point
while listening to
the sound
while listening to
the sound
>
(forward) or
.
(backward)
6
while playing and hold it until
you find the point.
Locate a point
while observing
on the iPod
display
while observing
on the iPod
display
>
(forward) or
.
(backward)
6
in pause and hold it until you
Select a menu
Press MENU and
find the point.
M
or
m
qk on the
remote to select a menu, and then
press ENTER qk.
press ENTER qk.
Go back to the
previous menu
previous menu
Press MENU qk on the remote.
Notes
You may use the universal adaptor supplied with your iPod for a
more customized fit. The iPod may be docked without the use of an
adaptor.
adaptor.
If you connect the iPod when another function is in use, the
function will change to iPod automatically.
Apple’s iPod Universal Dock Adapter (not supplied) can be used
with this unit.
To use an iPod, refer to the user’s guide of your iPod.
Before disconnecting the iPod, pause playback.
Before disconnecting the iPod, pause playback.
To use the unit as a battery charger (AC
only)
You can use the unit as a battery charger. The charging
status appears in the iPod display. For details, see the
user’s guide of your iPod.
status appears in the iPod display. For details, see the
user’s guide of your iPod.
On copyrights
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
All other trademarks and registered trademarks are
of their respective holders. In this manual, ™ and ®
marks are not specified.
marks are not specified.
Opening/closing the Sliding Tray
Setting the iPod
1
Press the PUSH OPEN/CLOSE button qf.
The Sliding Tray qg is ejected half way.
2
Pull the Sliding Tray qg all the way out.
3
4
5
Attach the iPod Universal Dock Adapter if
necessary (not supplied).
Place your iPod on the Sliding Tray qg.
Push in and adjust the Sliding Tray qg so that the
iPod fits on the Back Support qh.
Back
Support
Support
Closing the Sliding Tray
1
Remove the iPod
Push the Sliding Tray qg until it clicks.
3
2
Press the PUSH OPEN/CLOSE button qf.
4
Push the Sliding Tray qg into the unit.
Notes
Do not carry the unit with an iPod set on the connector. Doing so
may cause a malfunction.
Be sure to store the Sliding Tray qg before moving the unit.
Click on the first or last page to see other ZS-S2IP service manuals if exist.