Read Sony ZS-2000 Service Manual online
– 6 –
Setting Up
34
GB
Setting Up
Preparing the
system
system
According to the illustrations,
connect the cords firmly.
Wrong connections cause mal-
functions. Connect the mains
lead last.
connect the cords firmly.
Wrong connections cause mal-
functions. Connect the mains
lead last.
Aerial unit
1
Aerial terminals
FM ANTENNA
SELECTOR
SELECTOR
Note
Be sure to turn off the
power of the player
before connecting/
disconnecting the
mains lead.
power of the player
before connecting/
disconnecting the
mains lead.
2
to the mains
1
Hooking up the aerial
1
Strip the coating from the end of the cable and
twist the wires.
twist the wires.
2
Connect the black wire to U and the white wire to
terminal.
Note
Keep the aerial unit
away as far as possible
from the player. If you
do not, noise may be
heard.
away as far as possible
from the player. If you
do not, noise may be
heard.
Aerial unit
*
(supplied)
* Reorient the aerial unit to improve reception
(see pages 4 and 9).
Black
White
Setting Up
35
GB
2 Connecting the mains lead
Connect the mains lead to the mains.
3 Inserting batteries into the remote
Insert two R6 (size
AA) batteries
(not supplied)
Replacing batteries
With normal use, the batteries should last for about
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
continued
Tips
• The sound quality may
be changed depending
on the polarity of the
mains plug. Change the
direction of inserting
the plug and check the
sound quality.
on the polarity of the
mains plug. Change the
direction of inserting
the plug and check the
sound quality.
• This unit is supplied
with a different colour
speaker net. If
speaker net. If
you wish
to change the colour of
your speaker, pull each
corner of the speaker
net toward yourself to
remove the net. Then
exchange it
your speaker, pull each
corner of the speaker
net toward yourself to
remove the net. Then
exchange it
with
the
extra net.
Setting Up
36
GB
Earth
Important
When you use an
outdoor aerial, be sure
to connect the U
terminal to earth
against lightning. To
prevent a gas
explosion, do not
connect the ground
wire to a gas pipe.
outdoor aerial, be sure
to connect the U
terminal to earth
against lightning. To
prevent a gas
explosion, do not
connect the ground
wire to a gas pipe.
IEC standard socket
connector (not
supplied)
connector (not
supplied)
To improve the FM reception
1
Connect the FM outdoor aerial (not supplied). If
you use a distributor, you can also use the TV
aerial.
you use a distributor, you can also use the TV
aerial.
2
Set the FM ANTENNA SELECTOR at the rear to
“EXT”.
“EXT”.
To improve the MW/LW reception
Connect a 6- to 15-meter (20- to 50 feet) (not supplied)
insulated wire to the aerial unit terminal. Keep the
wire as horizontal as possible near the window or
outdoor. You do not need to disconnect the supplied
aerial unit.
insulated wire to the aerial unit terminal. Keep the
wire as horizontal as possible near the window or
outdoor. You do not need to disconnect the supplied
aerial unit.
Earth
Preparing the system (continued)
FM outdoor
aerial (not
supplied)
aerial (not
supplied)
Insulated wire
(not supplied)
(not supplied)
Setting Up
37
GB
Saving power
Even when power is turned off, this
player consumes about 5.6 W for time
indication, timer operation, remote
control reception. If you use the saving
power function, you can reduce power
consumption to less than 1 W.
player consumes about 5.6 W for time
indication, timer operation, remote
control reception. If you use the saving
power function, you can reduce power
consumption to less than 1 W.
DISPLAY
ENTER MEM
ENTER MEM
When the power is off, press and hold
DISPLAY•ENTER MEM for about 2 seconds.
DISPLAY•ENTER MEM for about 2 seconds.
The player enters the lower power consumption
standby mode.
standby mode.
To cancel the saving power
To make the time indication appear, press and hold
DISPLAY•ENTER MEM for about 2 seconds when the
power is off.
DISPLAY•ENTER MEM for about 2 seconds when the
power is off.
Click on the first or last page to see other ZS-2000 service manuals if exist.