Read Sony ZS-2000 (serv.man2) Service Manual online
– 5 –
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Playing a CD
Connect the AC power cord to the wall outlet (see page 26).
1
Press Z CD OPEN/CLOSE
(direct power-on) and place the
CD on the CD tray until it clicks
into place.
(direct power-on) and place the
CD on the CD tray until it clicks
into place.
2
Press u (N on the remote).
The CD tray closes and the player
plays all the tracks once.
plays all the tracks once.
With the label side up
Display
Playing time
Track number
2
1
Basic Operations
Use these buttons for additional operations
Tip
Next time you want to
listen to a CD, just press
u. The player turns on
automatically and starts
playing the CD.
listen to a CD, just press
u. The player turns on
automatically and starts
playing the CD.
To
Do this
adjust the volume
Turn VOLUME toward +
or – (press VOL +, – on
the remote).
or – (press VOL +, – on
the remote).
stop playback
Press x.
pause playback
Press u (X on the
remote).
Press again to resume play
after pause.
remote).
Press again to resume play
after pause.
go to the next track
Press >.
go back to the previous track
Press ..
remove the CD
Press Z CD OPEN/
CLOSE.
CLOSE.
turn on/off the player
Press POWER.
u
., >
Z
CD
OPEN/CLOSE
VOLUME
POWER
x
Listening to the radio
Connect the AC power cord to the wall outlet (see page 26).
1
Press RADIO BAND • AUTO
PRESET until the band you want
appears in the display (direct
power-on).
PRESET until the band you want
appears in the display (direct
power-on).
Each time you press the button,
the band changes as follows:
“FM1” t “FM2” t “AM ”
the band changes as follows:
“FM1” t “FM2” t “AM ”
2
Hold down TUNE • TIME SET +
or – (TUNE + or – on the remote)
until the frequency digits begin to
change in the display.
or – (TUNE + or – on the remote)
until the frequency digits begin to
change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
the radio frequencies and stops
when it finds a clear station.
If you cannot tune in a station,
press the button repeatedly to
change the frequency step by
step.
press the button repeatedly to
change the frequency step by
step.
Display
Indicates an FM
stereo broadcast.
1
2
To
Do this
adjust the volume
Turn VOLUME toward +
or – (press VOL +, – on
the remote).
or – (press VOL +, – on
the remote).
turn on/off the radio
Press POWER.
To improve broadcast reception
FM:
FM:
Reorient the antenna for FM.
AM:
Keep the AM loop antenna as far as possible from the
player and reorient it.
player and reorient it.
If the broadcast is still noisy, connect the external
antenna (page 27).
antenna (page 27).
Use these buttons for additional operations
Tips
• The “FM1” and “FM2”
bands have the same
functions. You can store
the stations you want
separately in “FM1” and
“FM2” (page 14).
functions. You can store
the stations you want
separately in “FM1” and
“FM2” (page 14).
• If the FM broadcast is
noisy, press PLAY
MODE • MONO/ST
(MODE on the remote)
until “Mono ” appears in
the display and the
radio will play in
monaural.
MODE • MONO/ST
(MODE on the remote)
until “Mono ” appears in
the display and the
radio will play in
monaural.
• Next time you want to
listen to the radio, just
press RADIO BAND •
AUTO PRESET. The
player turns on
automatically and starts
playing the previous
station.
press RADIO BAND •
AUTO PRESET. The
player turns on
automatically and starts
playing the previous
station.
PLAY MODE
MONO/ST
POWER
VOLUME
Click on the first or last page to see other ZS-2000 (serv.man2) service manuals if exist.