Read Sony XDR-S40DBP Service Manual online
XDR-S40DBP
7
2-6. JACK BOARD
6 screw
3 Remove solder.
7 claw
7 claw
8 boss
5 Remove twelve solders.
0 sheet (VOL)
qa ground cushion
qs JACK board
0 two sheets (VOL)
1 Remove solder.
2 battery terminal (minus)
battery terminal (minus)
chassis
battery terminal (plus)
4 battery terminal (plus)
–
Rear bottom view
–
8 boss
9 Remove the JACK board block
in the direction of an arrow.
Battery terminal setting
Note 1: Insert only 1 turn in the ditch.
Note 2: When installing the JACK board, lean C216
and C230 in the direction of an arrow.
Wire setting
JACK board
JACK board
MAIN board
flat wire
MAIN board
DAB module
– Side view –
Note 3: Wire must not touch the JACK board.
Note 4: Fix the flat wire not to fall on the
outside of mounted board.
(Within
90°)
Click on the first or last page to see other XDR-S40DBP service manuals if exist.