XDR-S10DAB - Sony Audio Service Manual (repair manual). Page 3

Read Sony XDR-S10DAB Service Manual online

XDR-S10DAB
3
SECTION  2
GENERAL
This section is extracted 
from instruction manual.
DC IN 6V
Telescopic antenna
A
B
Rear
AC power adaptor (supplied)
DC IN 6V
Telescopic antenna
Initial setting for the unit
When the AC power adaptor is plugged in for the first time after purchase (or after resetting),  do the following.
1
Plug in the unit.
“Setting clock...” appears in the display, and DAB data adjust the clock as it is received. When finished, the
current time appears in the display.
Setting clock...
2
Press POWER to turn on the radio.
The unit will automatically scan and create a list of receivable DAB broadcasts.
 Sony DAB Radio
Note
If no broadcasts are found by the DAB scan, “No Stations available” appears in the display.
Set the clock
Do the following if DAB broadcast is not available (depending on area). The time setting mode by DAB becomes
invalid.
1
Press MENU and turn TUNE/SELECT to select the “Set clock,” and then press ENTER.
The hour indication will be displayed as follows.
    or ENTER
Time      08 :56
2
Turn TUNE/SELECT to set the hour, and then press ENTER.
3
Repeat step 2 to set the minute, year, month and day.
After setting the time, the clock starts from 0 seconds.
Notes
• If you do not operate within 7 seconds while setting the clock, the clock setting mode will be cancelled.
• Setup time for this operation is adjusted automatically when the customer operates the set while receiving DAB
service.
• The clock system of this unit is 24-hour system (“0:00” = midnight).
Setting the Sleep Timer
You can enjoy falling asleep to the radio using the built-in sleep timer that turns off the radio automatically after a
preset duration.
1
Press SLEEP while the unit is turned on.
“Sleep” appears in the display.
Sleep
 60 minutes
2
Press SLEEP to set the sleep timer duration.
Each time you press SLEEP, the duration changes as follows:
60
45
15
30
OFF
The unit automatically turns off when the duration time is passed.
Press ENTER or 7 seconds after you have finished setting the duration setting and released SLEEP, “activated”
appears in the display and then the sleep timer starts. The unit will play for the duration you set, and then shut off.
To change the Sleep Timer setting
Repeat step 2 to select the desired sleep timer setting even after the sleep timer has been activated.
To deactivate the Sleep Timer
• Press POWER, the unit will turn off.
• Press SLEEP to set the sleep timer “OFF,” only the sleep timer will be cancelled (the radio keeps ON).
Page of 16
Display

Click on the first or last page to see other XDR-S10DAB service manuals if exist.