Read Sony TCS-600DV Service Manual online
TCS-600DV
2
TABLE OF CONTENTS
1.
GENERAL
...................................................................
2
2.
SERVICING NOTES
................................................
2
3.
DISASSEMBLY
.........................................................
3
3-1. Cabinet Rear ASSY (600), “Lid ASSY (600),
Cassette” ................................................................
Cassette” ................................................................
3
3-2. MAIN Board ..........................................................
4
3-3. Mechanism Deck ...................................................
4
3-4. Head, Magnetic (Rec/PB/Erase) (HRPE901),
Belt (AR), Capstan/Reel (M901) ..........................
Belt (AR), Capstan/Reel (M901) ..........................
5
3-5. LED Board .............................................................
5
3-6. SP Board ................................................................
6
4.
MECHANICAL ADJUSTMENTS
.......................
7
5.
ELECTRICAL ADJUSTMENTS
.........................
7
6.
DIAGRAMS
6-1. Block Diagrams ......................................................
8
6-2. Printed Wiring Board –MAIN Board (Side A) – ...
9
6-3. Printed Wiring Board –MAIN Board (Side B) – ... 10
6-4. Schematic Diagram –MAIN Board (1/3) – ........... 11
6-5. Schematic Diagram –MAIN Board (2/3) – ........... 12
6-6. Schematic Diagram –MAIN Board (3/3) – ........... 13
6-7. Printed Wiring Board –LED, SP Board – .............. 14
6-8. IC BLOCK DIAGRAMS ....................................... 16
6-4. Schematic Diagram –MAIN Board (1/3) – ........... 11
6-5. Schematic Diagram –MAIN Board (2/3) – ........... 12
6-6. Schematic Diagram –MAIN Board (3/3) – ........... 13
6-7. Printed Wiring Board –LED, SP Board – .............. 14
6-8. IC BLOCK DIAGRAMS ....................................... 16
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
SECTION 1
GENERAL
REC lamp
REC TIME/PLAY MODE
VOR
TAPE COUNTER
z
REC
x
STOP
REW/REVIEW
FF/CUE
VOL
PAUSE
.
nN
PLAY
n
DIR
N
MIC
i
BATT,
E
lamps
Flat Mic
SPEED CONTROL
DPC
SECTION 2
SERVICING NOTES
In this set, the S301 (POWER) detects REC/PLAYBACK on.
It is mounted on the MAIN board, and therefore the REC/PLAYBACK on cannot be detected with the MAIN board removed.
When making an operation check and voltage check of mechnical deck with the MAIN board removed, fix the S301 at turn on.
It is mounted on the MAIN board, and therefore the REC/PLAYBACK on cannot be detected with the MAIN board removed.
When making an operation check and voltage check of mechnical deck with the MAIN board removed, fix the S301 at turn on.
S301
ON
*
–MAIN BOARD (side A) –
–MAIN BOARD (side B) –
SL301
7.
EXPLODED VIEWS
................................................ 18
7-1. Cabinet Section ...................................................... 18
7-2. Cassette Holder Section ........................................ 19
7-3. Mechanism Deck Section-1 (MT-600-175) .......... 20
7-4. Mechanism Deck Section-2 (MT-600-175) .......... 21
7-2. Cassette Holder Section ........................................ 19
7-3. Mechanism Deck Section-1 (MT-600-175) .......... 20
7-4. Mechanism Deck Section-2 (MT-600-175) .......... 21
8.
ELECTRICAL PARTS LIST
............................... 22
Also, soldering the lands SL301 bridge makes S301 to turn on.
This section is extracted from
instruction manual.
instruction manual.
Click on the first or last page to see other TCS-600DV service manuals if exist.