TA-SA300WR - Sony Audio Service Manual (repair manual). Page 9

TA-SA300WR

Note: The main unit corresponding to TA-SA300WR, wireless transceiv-

ers (EZW-RT50 (except Chinese model) or EZW-RT20 (Chinese 
model)) (2 units) and the remote commander corresponding to the 
main unit are necessary to execute this mode.

Procedure:
1.  Insert the wireless transceiver (EZW-RT50 (except Chinese 

model) or EZW-RT20 (Chinese model)) into the main unit.

 

EZW-RT50

Rear panel of the main unit

Wireless transceiver
(EZW-RT50 (except Chinese model) 
or EZW-RT20 (Chinese model))

2.  Insert the wireless transceiver (EZW-RT50 (except Chi-

nese model) or EZW-RT20 (Chinese model)) into the TA-
SA300WR.

 

Rear panel of the TA-SA300WR

EZW

-RT

50

Wireless transceiver
(EZW-RT50 (except Chinese model) 
or EZW-RT20 (Chinese model))

3.  Connect the AC power cord of the main unit.
4. Press 

[\/1] button on the main unit to turn the system on.

 

"/1

[      ] button

5.  Connect the AC power cord of the TA-SA300WR.
6.  When wireless transmission is activated, the [LINK/STAND-

BY] indicator turns green.

 

LINK/STANDBY

[LINK/STANDBY] indicator

7.  Press the button in order of the [DISPLAY] 

 [0]  [7] [2] 

 [SUBTITLE] on the remote commander corresponding to 
main unit aiming at the main unit.

8. Confi rm the [LINK/STANDBY] indicator of TA-SA300WR is 

orange lighting after step 7 is executed.

9.  The AC power cord of TA-SA300WR is pulled out to turn off 

the system.

Note: Please insert it after confi rming the [LINK/STANDBY] indicator of 

TA-SA300WR has been turned off when you insert the AC power 
cord again.