Read Sony TA-SA300WR Service Manual online
TA-SA300WR
4
converter transformer
(T901)
(T901)
heat sink (AMP)
Note 1:
Fit the cable so as not near
the heat sink (AMP) into the
hook of the chassis.
Note 3:
Fix the cable so as not near the
converter transformer (T901).
Note 2:
Fix the cable so as not near
the heat sink (AMP).
CABLE SETTING
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C935, C936, C941
and C951 on the POWER board) to discharge the capacitors (C935, C936, C941 and C951 on the POWER board).
When checking the board, for the electric shock prevention, connect the resistors to both ends of respective capacitors (C935, C936, C941
and C951 on the POWER board) to discharge the capacitors (C935, C936, C941 and C951 on the POWER board).
– POWER Board (Conductor Side) –
800
:/2 W
C951
C941
800
:/2 W
800
:/2 W
C935 (US, Canadian and Taiwan models)
C936 (Except US, Canadian and Taiwan models)
Click on the first or last page to see other TA-SA300WR service manuals if exist.