Read Sony STR-LSA1 Service Manual online
3
SECTION 1
GENERAL
This section is e
xtr
acted
acted
from instr
uction man
ual.
10
GB
Front Panel Parts
Description
Description
1
?/1 switch
Press to turn the receiver on and off.
To avoid damaging your speakers, be sure to rotate the
VOLUME control counterclockwise immediately after
you turn on the receiver.
Press to turn the receiver on and off.
To avoid damaging your speakers, be sure to rotate the
VOLUME control counterclockwise immediately after
you turn on the receiver.
STANDBY indicator
Lights up when the receiver is turned off.
Lights up when the receiver is turned off.
2
Remote sensor
When using the supplied remote, point it towards this
sensor (
When using the supplied remote, point it towards this
sensor (
).
3
SLEEP indicator
Lights up when the Sleep Timer function is activated
(page 24).
Lights up when the Sleep Timer function is activated
(page 24).
4
H.A.T.S. indicator
Lights up during H.A.T.S. (High-quality digital Audio
Transmission System) function is activated (page 25).
Lights up during H.A.T.S. (High-quality digital Audio
Transmission System) function is activated (page 25).
5
DISPLAY button
Press repeatedly to change the information in the
display window as follows:
Press repeatedly to change the information in the
display window as follows:
v
Index name of the component
1)
v
Model name of the component
2)
When the built-in tuner is selected
v
Index name of the preset station
1)
or program
station name
3)
v
Frequency
1) An index name appears only if one has been assigned to the
selected component or preset station (page 22).
2) If the model name isn’t known, the category of the component
appears (e.g., “CD” or “MD”). If the category isn’t known,
“Unknown” appears.
“Unknown” appears.
3) Appears only during RDS reception (page 18).
When you press the DISPLAY button while the Ping
function is on, “N N n n” appears for a few
seconds in the display of the currently selected
component (page 25).
function is on, “N N n n” appears for a few
seconds in the display of the currently selected
component (page 25).
Location of
Parts
Parts
This chapter provides information
about the location and function of the
buttons and controls on the front
panel and supplied remote.
about the location and function of the
buttons and controls on the front
panel and supplied remote.
11
GB
Location kf Parts
6
Display
Shows various types of information.
Shows various types of information.
7
BAND/< button
Selects the FM or AM band. If you press this button
while the receiver is turned off, the receiver
automatically turns on and tunes to the station that
was last received.
Use this button to move the cursor when entering an
index name for a component or preset station.
Selects the FM or AM band. If you press this button
while the receiver is turned off, the receiver
automatically turns on and tunes to the station that
was last received.
Use this button to move the cursor when entering an
index name for a component or preset station.
8
TUNE MODE/> button
When the built-in tuner is selected, press to select the
tuning mode. The mode indication appears in the
display as follows:
When the built-in tuner is selected, press to select the
tuning mode. The mode indication appears in the
display as follows:
To select
Press TUNE MODE repeatedly
to light up
to light up
Manual Tuning
MANUAL
Automatic Tuning
AUTO
Preset Tuning
PRESET
Use this button to move the cursor when entering an
index name for a component or preset station.
index name for a component or preset station.
9
Jog dial
Rotate to select the program source, tune to stations,
preset the stations, enter index names, or change
settings.
Rotate to select the program source, tune to stations,
preset the stations, enter index names, or change
settings.
q;
JOG MENU button
Press repeatedly to change the jog dial function. The
indication corresponding to the jog dial function
appears in the display as follows:
Press repeatedly to change the jog dial function. The
indication corresponding to the jog dial function
appears in the display as follows:
To
Press JOG MENU repeatedly to
display
display
Select a component
A component name
Adjust the sound
Sound Menu
Make various settings
Setup Menu
Receive broadcasts*
Station name or frequency
*
Selectable only when the built-in tuner is selected.
After a component name appears
Rotate the jog dial to select the component you want to use.
After “Sound Menu” appears
You can use the jog dial and ENTER button to adjust the
sound (page 14).
sound (page 14).
After “Setup Menu” appears
You can use the jog dial and ENTER button to preset radio
stations (page 19), name preset stations or connected
components (page 22), or make other settings (page 24).
stations (page 19), name preset stations or connected
components (page 22), or make other settings (page 24).
After a station name or frequency appears
You can use the jog dial to select a preset station (page 20) or
tune to a radio station either manually (page 18) or
automatically (page 19).
tune to a radio station either manually (page 18) or
automatically (page 19).
qa
ENTER button
Press to enter a setting made with the jog dial.
Press to enter a setting made with the jog dial.
qs
VOLUME control
After turning on the selected component, rotate to
adjust the volume.
After turning on the selected component, rotate to
adjust the volume.
qd
MUTING indicator
Lights up when the MUTING button on the supplied
remote is pressed.
Lights up when the MUTING button on the supplied
remote is pressed.
qf i
connector
Connects headphones. When the headphones are
connected, the kutput to the speakers is automatically
cut off.
connected, the kutput to the speakers is automatically
cut off.
i
I
BAND
TUNE MODE
JOG MENU
ENTER
MUTING
VOLUME
STANDBY
SLEEP
H.A.T.S
DISPLAY
?/1
A
N
M
B
E
C D
G
F
H
J K L
I
Click on the first or last page to see other STR-LSA1 service manuals if exist.