Read Sony STR-DN1050 Service Manual online
19
STR-DN1050
FIX MODEL AND DESTINATION MODE
This mode is to fi x the set for model & destination.
When turning on the set, the message below appears if the setting
is not fi xed with its model or destination.
This mode is to fi x the set for model & destination.
When turning on the set, the message below appears if the setting
is not fi xed with its model or destination.
Items
Display
AREA/DESTINATION
NOT FIX
NOT FIX
D E S T. U N F I X
Procedure:
1. Press the [?/1] button to turn on the main power.
2. While pressing [DISPLAY] button, press and release the
1. Press the [?/1] button to turn on the main power.
2. While pressing [DISPLAY] button, press and release the
[A.F.D./2CH], [MOVIE], [MUSIC] button in order, the
message “SPECIALIZE” appears.
message “SPECIALIZE” appears.
3. Press the [
M ] or [ m ] key of the remote commander, the
message “<SPECIAL>” appears.
4. Press the [
] key of the remote commander to enter the
Special Menu List.
5. Each time the [
M ] or [ m ] key of the remote commander is
pressed, the item is switched in order as follows.
Items
Display
SYSTEM
VERSION
S Y S v X. X X X
MAIN VERSION
M A I
N
v X. X X
VIDEO VERSION
V I
D E O
v X. X X
OSD VERSION
O S D
v X. X X
DSP SFLASH1 VER
S F L A S H v X. X X
NETWORK VERSION N E T
v X. X X
MODEL
display
M
O
D
E
L
DESTINATION setting D E S T I
N Y
MODEL &
DESTINATION check
DESTINATION check
M O D E L & A R E A
6. Go to MODEL display and press the [
] key of remote
commander.
7. The message as below appears.
Items
Display
Model N105 fi
x
N 1 0 5 f i x
8. Either one of the display below appears according to the
destination of the set.
Items
Display
Destination
D E S T U N F I X
Destination UCA
fi
x
U
C
A
f i x
Destination J
fi
x
J
f i x
Destination TW/SAF fi
x
T
W
f i x
Destination SP/CN fi
x
C
N
f i x
Destination KR
fi
x
K
R
f i x
Destination E2/E3 fi
x
C
H
3
f i x
Destination CEL
fi
x
C
E
L
f i x
Destination AU
fi
x
A
U
f i x
Destination SP
fi
x
S
P
f i x
Destination E51
fi
x
E 5 1 f i x
Destination BR
fi
x
B
R
f i x
Destination AR
fi
x
A
R
f i x
Destination MX
fi
x
M
X
f i x
9. Press the [
M ] or [ m ] key of remote commander to set
destination info if message “DEST UNFIX” appears.
10. Press the [
] key of remote commander to select the
destination.
11. The message “DESTINY” appears.
12. Go to MODEL & DESTINATION check and press the [
12. Go to MODEL & DESTINATION check and press the [
]
key of remote commander.
13. Either one of the message as below appears.
Items
Display
MODEL & AREA NOT FIX M D. D S T. U N F
I
X
MODEL NOT FIX
M O D E L. U N F
I
X
DESTINATION NOT FIX
D E S T.
U N F
I
X
N105
N 1
0
5
x
x
x
DESTINATION RESET
M D. D S T. U N F
I
X
xxx:
Area
display
14. Repeat step (12) onwards if message “DEST. UNFIX”
appears.
15. Set need to be reset and updated again if the message
appeared incorrectly.
16. Press the [
M ] or [ m ] key of remote commander goes to “MD.
DST.UNFIX”.
17. Press the [
] key of remote commander.
18. The set will power off and then power on by itself.
19. Start the setting again from step (1) onwards.
20. Perform SHIPMENT MODE if the message appears correctly.
21. The set will be power off itself and can be used as normal by
19. Start the setting again from step (1) onwards.
20. Perform SHIPMENT MODE if the message appears correctly.
21. The set will be power off itself and can be used as normal by
pressing [?/1] button.
MHL VBUS MODE
This mode is to display the MHL VBUS status.
Procedure:
1. Press the [?/1] button to turn on the main power.
2. While pressing [DISPLAY] button, press and release the
This mode is to display the MHL VBUS status.
Procedure:
1. Press the [?/1] button to turn on the main power.
2. While pressing [DISPLAY] button, press and release the
[MUSIC], [MOVIE], [A.F.D./2CH] button in order, the
message “VBUS STAT” appears.
message “VBUS STAT” appears.
3. Press the [
] key of the remote commander.
4. Either one of the message as below appears.
Items
Display
No Error
N O
E R R O R
Current Stopped
V
.
E R R O R
x
x
HDMI
IN
7
6
5
4
3
2
1
0
0 : No error 1 : VBUS output is stopped
Example:
In 7 & In 0 are error : xx = 81
In 1 & In 0 are error : xx = 03
SIRCS MODE CHANGE
To change remote control mode (AV1<=>AV2).
Procedure:
1. While pressing [A.F.D./2CH], press the [?/1] button to turn
To change remote control mode (AV1<=>AV2).
Procedure:
1. While pressing [A.F.D./2CH], press the [?/1] button to turn
on the main power.
2. Either the message below appears. Select the desired mode.
Items
Display
AV1
C.
M
O
D
E
A
V
1
AV2
C.
M
O
D
E
A
V
2
Click on the first or last page to see other STR-DN1050 service manuals if exist.