DSC-U60 - Sony Digital Camera Service Manual (repair manual)

US Model

Canadian Model

AEP Model

UK Model

E Model

Hong Kong Model

Australian Model

Chinese Model

Tourist Model

Japanese Model

1. SERVICE NOTE
2. DISASSEMBLY

3. BLOCK DIAGRAMS

4. PRINTED WIRING BOARDS

AND SCHEMATIC DIAGRAMS

5. REPAIR PARTS LIST

OVERALL
POWER
CD-426 FLEXIBLE, SL-61 FLEXIBLE,
ST-80, US-5 FLEXIBLE,
SW-378 FLEXIBLE,
FP-566 FLEXIBLE, FP-567 FLEXIBLE

EXPLODED VIEWS
ELECTRICAL PARTS LIST

• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (987626451.pdf).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987626441.pdf).
• This service manual contains information for Japanese model as well.

• Reference No. search on printed wiring boards is available.

Revised-1

Replace the previously issued
SERVICE MANUAL 9-876-264-11
with this manual.

— 2 —

Section

Title

Page

4-2.

Schematic Diagrams ························································ 4-5
TY-20 (1/4) (CAMERA DSP, MAIN CPU) ·················· 4-11
TY-20 (2/4) (MEMORY, CONNECTOR) ····················· 4-13
TY-20 (3/4) (LENS DRIVE) ········································· 4-15
TY-20 (4/4) (HI CONTROL) ········································ 4-17
PD-176 (LCD DRIVE, CONTROL SWITCH) ············· 4-19
DD-209 (1/2) (DC IN, REGULATOR) ························· 4-21
DD-209 (2/2) (DC/DC CONVERTER) ························ 4-23

4-3.

Printed Wiring Boards ··················································· 4-35
TY-20 ············································································· 4-39
PD-176 ··········································································· 4-41
DD-209 ·········································································· 4-43

4-4.

Waveforms ····································································· 4-54

4-5.

Mounted Parts Location ················································ 4-57

............................................ 5-1

5-2.

Electrical Parts List ······················································· 5-6

4-5

(For schematic diagrams)
• All capacitors are in 

µ

F unless otherwise noted. pF : 

µ

µ

F.  50 V or less are not indicated except for electrolytics

and tantalums.

• Chip resistors are 1/10 W unless otherwise noted.

k

Ω

=1000 

Ω

, M

Ω

=1000 k

Ω

.

• Caution when replacing chip parts.

New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum
capacitor, Because it is damaged by the heat.

• Some chip part will be indicated as follows.

Example

C541

L452

22U

10UH

TA  A

2520

• Constants of resistors, capacitors, ICs and etc with XX

indicate that they are not used.
In such cases, the unused circuits may be indicated.

• Parts with 

★

 differ according to the model/destination.

Refer to the mount table for each function.

• All variable and adjustable resistors have characteristic

curve B, unless otherwise noted.

• Signal name

XEDIT

→

 

EDIT

PB/XREC 

→

 PB/REC

•

2

: non flammable resistor

•

5

: fusible resistor

•

C

: panel designation

•

A

: B+ Line

•

B

: B– Line

•

J

: IN/OUT direction of (+,–) B LINE.

•

C

: adjustment for repair.

•

A

: VIDEO SIGNAL (ANALOG)

•

A

: AUDIO SIGNAL (ANALOG)

•

A

: VIDEO/AUDIO SIGNAL

•

A

: VIDEO/AUDIO/SERVO SIGNAL

•

A

: SERVO SIGNAL

• Circled numbers refer to waveforms.
(Measuring conditions voltage and waveform)

• Voltages and waveforms are measured between the

measurement points and ground when camera shoots
color bar chart of pattern box.  They are reference values
and reference waveforms.
(VOM of DC 10 M

Ω

 input impedance is used)

• Voltage values change depending upon input

impedance of VOM used.)

1. Connection

2. Adjust the distance so that the display of Fig. a can be

obtain.

When indicating parts by reference number, please
include the board name.

Kinds of capacitor

Case Size

External dimensions (mm)

Les composants identifiés par une marque

0

 sont critiques pour la sécurité.

Ne les remplacer que par une pièce portant
le numéro spécifie.

The components identified by mark 

0

  or

dotted line with mark 

0

 are critical for safety.

Replace only with part number specified.

Front of the lens

Pattern box

L

L = About 30 cm

A B

B

C

D

A

A=B

C=D

Fig.a (Picture on LCD display)