STR-DN1010 - Sony Audio Service Manual (repair manual). Page 14

Adjustment to decide the standard of the video input signal.

Note: After replacing DIGITAL VIDEO board, or after “RESET” of the 

special menu mode is executed, perform this adjustment.

1.  Adjustment jig
The color pattern generator that can output 100% in NTSC/PAL/ 
HD color bar signal to the component and the composite at the 
same time is necessary for the adjustment.
When there is no color pattern generator, it is possible to substitute 
it by the Blu-ray Disc player that can output the component termi-
nal and the video terminal at the same time (Substitution model 
name example: BDP-S350).
However, please do the following signal output confi rmation with 
the oscilloscope beforehand when substituting it with the Blu-ray 
Disc player.

2-2.  Procedure for color pattern generator
1.  It connects of step 2-1, and the turn on the main power.
2.  “BD” is selected by using [INPUT SELECTOR] dial.
3.  Input NTSC color bars signal from the color pattern generator.
4.  Press the [POWER] button to turn off the main power.
5.  While pressing the [MOVIE] and [DISPLAY] buttons, press 

the [POWER] button to turn on the main power. When cor-
rectly entering the test mode “FIN _:_:_” is displayed (keeps 
pressing two buttons until the message appears).

6.  The NTSC signal adjustment is begun when press the cross 

(center of cursor) button of remote commander, and the dis-
play changes from “N:MWX_ _ _ _ _” to “N:MWoCDV_ _” 
little by little. Finally, the display returns to the display of
“FIN N:_:_”.

7.  Input PAL color bars signal from the color pattern generator.
8.  Perform step 6 to 7 for the PAL signal adjustment.
9.   Input HD color bars signal (720p or 1080i) from the color pat-

tern generator.

10. Perform step 6 to 7 for the HD signal adjustment.
11.  The turn off the main power.

2-3.  Procedure for Blu-ray Disc player
1.  It connects of step 2-1, and the turn on the main power of set 

and Blu-ray Disc player.

2.  “BD” is selected by using [INPUT SELECTOR] dial.
3.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 

DVD test disc “HLX-504 (Part No. J-6090-088-A)” or “HLX- 
513 (Part No. J-2501-305-A)” is insert. The disc playback au-
tomatically becomes start “Main Menu” is display.

4.  “1.Color Bar 100%” of “1.Video Signal” is reproduced, and 

100% in the color bar is displayed in the TV monitor, playing 
the Blu-ray Disc player is pause playback.

5.  Press the [POWER] button to turn off the main power of the 

set.

6.  While pressing the [MOVIE] and [DISPLAY] buttons, press 

the [POWER] button to turn on the main power of the set. 
When correctly entering the test mode “FIN _:_:_” is dis-
played (keeps pressing two buttons until the message appears).

7.  The NTSC signal adjustment is begun when press the cross 

(center of cursor) button of remote commander, and the dis-
play changes from “N:MWX_ _ _ _ _” to “N:MWoCDV_ _” 
little by little. Finally, the display returns to the display of
“FIN N:_:_”.

8.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 

change to DVD test disc “HLX-506 (Part No. J-6090-077-A)” 
or “HLX-507 (Part No. J-6090-078-A)”. The disc playback au-
tomatically becomes start “Main Menu” is display.

9.  “1.Color Bar 100%” of “1.Video Signal” is reproduced, and 

100% in the color bar is displayed in the TV monitor, playing 
the Blu-ray Disc player is pause playback.

10. The PAL signal adjustment is begun when press the cross (cen-

ter of cursor) button of remote commander. Finally, the display 
returns to the display of “FIN N:P:_”.

11.  Press the OPEN/CLOSE button of the Blu-ray Disc player, and 

change to DVD test disc “HLX-104 (Part No. J-6090-199-A)”. 
The disc playback automatically becomes start “Main Menu” 
is display.

12. “59.94Hz, 1080i” → “1.Video Signal” → “1.Color Bar 100%” 

is selected, and 100% in the color bar is displayed in the TV 
monitor, playing the Blu-ray Disc player is pause playback.

13. The video output of the Blu-ray Disc player is switched 1080i 

(The output from the component terminal of the Blu-ray Disc 
player becomes 1080i output).

14. The HD signal adjustment is begun when press the cross (cen-

ter of cursor) button of remote commander. Finally, the display 
returns to the display of “FIN N:P:H”.

15. The turn off the main power.