Read Sony STR-DN1010 Service Manual online
STR-DN1010
12
SIRIUS FACTORY TEST MODE
(US, Canadian models only)
Mode to confi rm operation of SIRIUS. Doing display of ID of
SIRIUS antenna and output of audio signal that SIRIUS antenna
generates, it is confi rmed that there are no problems in the commu-
nication of the SIRIUS antenna and the transmission of the audio
signal.
Procedure:
1. The SIRIUS antenna was connected, while pressing the
(US, Canadian models only)
Mode to confi rm operation of SIRIUS. Doing display of ID of
SIRIUS antenna and output of audio signal that SIRIUS antenna
generates, it is confi rmed that there are no problems in the commu-
nication of the SIRIUS antenna and the transmission of the audio
signal.
Procedure:
1. The SIRIUS antenna was connected, while pressing the
[DISPLAY] and [2CH/A.DIRECT] buttons, press the [
?/1
]
button to turn on the main power.
2. The message “SIRIUS”, “LOADING” and “SR TUNER” ap-
pear one after another.
HISTORY MODE
The state that the set is used is memorized.
Procedure:
1. While pressing the [INPUT MODE] and [2CH/A.DIRECT]
The state that the set is used is memorized.
Procedure:
1. While pressing the [INPUT MODE] and [2CH/A.DIRECT]
buttons, press the [
?/1
] button to turn on the power and “HIS-
TORY” is displayed.
2. Each time the [
M
]/[
m
] buttons on the remote commander is
pressed, the item is switched in order as follows.
Items
Display
Protector count
COUNT XX
Total single power on time
SxxxxxHxxM
Sound fi eld
SOUNDFIELD
Input function
FUNCTION
Input mode
INPUT MODE
Digital select
DIG SELECT
Stream information
STREAMINFO
Signal confi guration
CONF xxxxx
Headphones
HEADPH xxx
Volume
VOL 00 xx
Bass
BASS xxxdB
Treble
TREB xxxdB
Level FL/FR
FL/R xxxxxx
Level SL/SR
SL/R xxxxxx
Level CT/SW
C/SW xxxxxx
Level BL/BR
BL/R xxxxxx
Total power on time
T OHOM
Muting
MUTING xxx
Power on counter
(Rebox test mode)
(Rebox test mode)
REBOX 0
Protector status
PROT xxxx
Temperature status
TEMP xxxc
DIGITAL MEDIA PORT TEST
Procedure:
1. Connect the DMPORT check jig (Part No. J-2501-309-A) with
Procedure:
1. Connect the DMPORT check jig (Part No. J-2501-309-A) with
the DMPORT jack (CN2007) on the DIGITAL board.
2. While pressing the [SPEAKERS] and [MUSIC] buttons, press
the [
?/1
] button to turn on the main power.
3. The message “DMPORT T.” and “DMPORT OK” appears on
the fl uorescent indicator tube and enter the digital media port
test mode (Confi rmation of communication line).
test mode (Confi rmation of communication line).
When “NO DETECT”, “UART NG” and “UART TO” are dis-
played on the fl uorescent indicator tube, confi rm the connec-
tion of the DMPORT check jig, and enter the mode again.
played on the fl uorescent indicator tube, confi rm the connec-
tion of the DMPORT check jig, and enter the mode again.
Each time the [
>
] button on the remote commander is
pressed, the connect check and adaptor version check are
switched.
switched.
Press the [
.
] button on the remote commander, connected
confi rmation of the DMPORT check jig is done again.
4. To a pin-jack of the DMPORT check jig input information
relevant to audio signal (sine-wave 1.0 Vrms) and composite
video signal (white 100% 1.0 Vp-p, color bar, etc.).
video signal (white 100% 1.0 Vp-p, color bar, etc.).
5. Confi rm the output of speakers and monitor TV (Confi rmation
of analog signal).
6. To release from this mode, press the [
x
] button on the remote
commander.
color
pattern
generator
DMPORT
check jig
(Part No.
J-2501-309-A)
J001
AF
oscillator
set
TV
monitor
FL/FR
speaker
DIGITAL board
CN2007
MAIN board
TB506
VIDEO board
J6004
SOFTWARE VERSION DISPLAY MODE
The software version is displayed.
Procedure:
1. While pressing the [INPUT MODE] and [MUSIC] buttons,
The software version is displayed.
Procedure:
1. While pressing the [INPUT MODE] and [MUSIC] buttons,
press the [
?/1
] button to turn on the main power.
2. The message “N1 ** MX.XX” appears.
**: Destination
Each time the [DISPLAY] button is pressed, “F.Ver X.XX”,
“H.Ver X.XX” and “S.Ver X.XXNII” this order, and returns to
the “N1 ** MX.XX” displayed.
“H.Ver X.XX” and “S.Ver X.XXNII” this order, and returns to
the “N1 ** MX.XX” displayed.
Click on the first or last page to see other STR-DN1010 service manuals if exist.