Read Sony STR-DH500 Service Manual online
STR-DH500
8
SECTION 2
TEST MODE
AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE
(US, Canadian, Australian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
(US, Canadian, Australian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Turn the [INPUT SELECTOR] control to set AM and press the
[
[
?/1
] button to turn off the main power.
1. While depressing the [TUNING MODE] button, press the
[
?/1
] button to turn on the main power.
2. Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fl uorescent segments are tested.
When this test is activated, all segments light on at the same time,
then each segment lights on one after another.
then each segment lights on one after another.
* Procedure:
While depressing the [TUNING MODE] and the [DISPLAY]
buttons simultaneously, press the [
buttons simultaneously, press the [
?/1
] button to turn on the
main power.
1. ALL segments light on.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
HDMI
S-AIR
DTS -ES
NEO:6
96/24
RDS
MONO
CAT
SAT
ZONE2
SLEEP
COAX
OPT
dB
Hz
k
ft.
m
MHz
D.RANGE
MEMORY
SP A
SP B
x
II
PL
ST
DEX
2. Turn the [INPUT SELECTOR] control, confi rm display.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
HDMI
S-AIR
DTS -ES
NEO:6
96/24
RDS
MONO
CAT
SAT
ZONE2
SLEEP
COAX
OPT
dB
Hz
k
ft.
m
MHz
D.RANGE
MEMORY
SP A
SP B
x
II
PL
ST
D
EX
3. Turn the [INPUT SELECTOR] control, confi rm display.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
HDMI
S-AIR
DTS
-ES
NEO:6
96/24
RDS
MONO
CAT
SAT
ZONE2
SLEEP
COAX
OPT
dB
Hz
k
ft.
m
MHz
D.RANGE
MEMORY
SP A
SP B
x
II
PL
ST
D
EX
4. Turn the [INPUT SELECTOR] control, all segments light off.
SOUND FIELD CLEAR MODE
* The preset sound fi eld is cleared when this mode is activated.
* The preset sound fi eld is cleared when this mode is activated.
Use this mode before returning the product to clients upon com-
pletion of repair.
pletion of repair.
* Procedure:
1. While depressing the [2CH/A.DIRECT] button, press the
1. While depressing the [2CH/A.DIRECT] button, press the
[
?/1
] button to turn on the main power.
2. The message “S.F. CLR.” appears for a moment and initializa-
tion is performed.
SOFTWARE VERSION CHECK MODE
* The software version is displayed.
* Procedure:
1. While depressing the [TUNING +] and the [DISPLAY]
* The software version is displayed.
* Procedure:
1. While depressing the [TUNING +] and the [DISPLAY]
buttons simultaneously, press the [
?/1
] button to turn on the
main power.
2. The model name, destination and the software version are
displayed for a moment.
KEY CHECK MODE
* Button check
* Procedure:
1. While depressing the [TUNING +] and the [2CH/A.DIRECT]
* Button check
* Procedure:
1. While depressing the [TUNING +] and the [2CH/A.DIRECT]
buttons simultaneously, press the [
?/1
] button to turn on the
main power.
2. The message “REST 12” appears.
3. Every pressing of any button other than the [
3. Every pressing of any button other than the [
?/1
] counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
not counted again. When all buttons are pressed “REST 00”
appears.
SWAP ALL MODE
* The signal will be swap to all channel so that all speaker will
* The signal will be swap to all channel so that all speaker will
have sound output.
* Procedure:
1. While depressing the [TUNING +] and the [A.F.D.] buttons
1. While depressing the [TUNING +] and the [A.F.D.] buttons
simultaneously, press the power [
?/1
] button to turn on the
main power.
2. “SWP.
ALL”
appears.
3. After a few seconds, “SWAP” appears. (No change while dis-
played.)
SHIPMENT MODE
* All preset contents are reset to the default setting.
* Procedure:
1. While depressing the [INPUT MODE] and the [DISPLAY]
* All preset contents are reset to the default setting.
* Procedure:
1. While depressing the [INPUT MODE] and the [DISPLAY]
buttons simultaneously, press the power [
?/1
] button to turn
on the main power.
2. “CLEARED” appears and switch off the set.
RE-BOX CLASSIFICATION TEST MODE
* To check the number of times set powered on.
* Procedure:
1. While pressing the [MUTING] and the [INPUT MODE] but-
* To check the number of times set powered on.
* Procedure:
1. While pressing the [MUTING] and the [INPUT MODE] but-
tons simultaneously, press the power [
?/1
] button to turn on
the main power.
2. “R.BOX
[][][]
xxx” appears.
3. xx indicates number of times set powered on.
4. Press any button or power off the set to release test mode.
4. Press any button or power off the set to release test mode.
PROTECTOR AUTO OFF
* To disable auto off after protector occur.
* Procedure:
1. While depressing the [TUNING –] and the [A.F.D.] buttons
* To disable auto off after protector occur.
* Procedure:
1. While depressing the [TUNING –] and the [A.F.D.] buttons
simultaneously, press the power [
?/1
] button to turn on the
main power.
2. “PROTEVER”
appears.
Ver. 1.1
Click on the first or last page to see other STR-DH500 service manuals if exist.