Read Sony STR-DG800 Service Manual online
14
STR-DG800
SECTION 3
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the [TONE MODE] and the [DIRECT] buttons
simultaneously, press the
simultaneously, press the
?/1
button to turn on the main power.
The message “FACTORY” appears for a moment and the present
contents are reset to the default values.
contents are reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE
MODE
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Turn the [INPUT SELECTOR] control to set AM and press the
?/1
button to turn off the main power.
While depressing the [CATEGORY MODE] (US, CND) or
[DIMMER] (E2, MY, SP, TW) button, press the
[DIMMER] (E2, MY, SP, TW) button, press the
?/1
button to
turn on the main power.
Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.
Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same
time, then each segment lights on one after another.
time, then each segment lights on one after another.
* Procedure:
While depressing the [SPEAKERS $OFF/A/B/A+B%] and the
[DISPLAY] buttons simultaneously, press the
[DISPLAY] buttons simultaneously, press the
?/1
button to turn
on the main power.
1. ALL segments light on.
[MULTI CHANNEL DECODING] LED light on.
2. Turn the [INPUT SELECTOR] control, confirm display.
[MULTI CHANNEL DECODING] LED light on.
3. Turn the [INPUT SELECTOR] control, confirm display.
[MULTI CHANNEL DECODING] LED light on.
4. Turn the [INPUT SELECTOR] control, all segments light off.
[MULTI CHANNEL DECODING] LED light off.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the [2CH] button, press the
?/1
button to turn
on the main power.
The message “S.F. INITIALIZE” appears for a moment and ini-
tialization is performed.
The message “S.F. INITIALIZE” appears for a moment and ini-
tialization is performed.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the [SPEAKERS $OFF/A/B/A+B%] and the
[DIRECT] buttons simultaneously, press the
[DIRECT] buttons simultaneously, press the
?/1
button to turn
on the main power.
The model name, destination and the software version are dis-
played for a moment.
The model name, destination and the software version are dis-
played for a moment.
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the [SPEAKERS $OFF/A/B/A+B%] and the
[MULTI CH IN] buttons simultaneously, press the
[MULTI CH IN] buttons simultaneously, press the
?/1
button to
turn on the main power.
Either the message “REST 15” appears.
Every pressing of any button other than the
Either the message “REST 15” appears.
Every pressing of any button other than the
?/1
counts down
the buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
counted again. When all buttons are pressed “REST 00” appears.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander
can be selected.
* Procedure:
While depressing the [INPUT MODE] button, press the
?/1
but-
ton to turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2” ap-
pears for a moment and select the desired mode.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2” ap-
pears for a moment and select the desired mode.
L
SW
C
R
SL
S
SR
SBL SB
SBR
LFE
SP.A SP.B A.DIRECT HDMI EQ D.RANGE
DIGITAL EX
SLEEP MULTI CH IN 2
PL
NIGHT DTS-HD
NEO:6
D.ASSIGN STEREO
RDS
Hz
k
MHz
dB
m
t.
f
96/24
II x
1
D D
DTS-ES
OPT COAX MONO
+
D D
D
CAT
D D
MEMORY
L
SW
R
S
SB
LFE
A
A.DIRECT HDMI EQ
EX
SLEEP PL
DTS-HD
x
1
D D
RDS
Hz
m
96/24
-ES
OPT
MONO
+
D
D D
Ver. 1.1
Click on the first or last page to see other STR-DG800 service manuals if exist.