STR-DG800 - Sony Audio Service Manual (repair manual). Page 9

9

GB

A

?

1

Press to turn on or off the 
Sony audio/video components 
that the remote is 
programmed to operate.
To turn the TV on or off, press 
TV(wk) and then press AV 

 

?/1. 
If you press ?/1 (B) at the 
same time, it will turn off the 
receiver and other 
components (SYSTEM 
STANDBY).
Note
The function of the AV ?/1 
switch changes automatically 
each time you press the input 
buttons (C).

B ?

1

Press to turn the receiver on or 
off.
To turn off all components, 
press ?/1 and AV ?/1 (A) at 
the same time (SYSTEM 
STANDBY).

C

Press one of the buttons to 
select the component you 
want to use. When you press 
any of the input buttons, the 
receiver turns on. The buttons 
are factory assigned to control 
Sony components as follows. 
You can program the remote 
to control non-Sony 
components by changing the 
code. For details see 
“Programming the remote” 
(page 79).

D

Press ZONE 2 to light up the 
button to select the command 
mode of the remote.

E

Press to select the current 
input for the main receiver.

F

Press to select sound fields 
(MOVIE, MUSIC).

G

Press to activate the Auto 
Calibration function.

H

Press to enter direct tuning 
mode.

VIDEO 1

VCR (VTR mode 3)

VIDEO 2

VCR (VTR mode 2)

VIDEO 3

VCR (VTR mode 1)

DVD

DVD player

TV/SAT

TV tuner

MD/TAPE

MD deck

SA-CD/CD Super Audio CD/CD 

player

TUNER

Built-in tuner

PHONO

Not assigned.

GB

I

Press to 
– preset/tune to preset stations. 
– select track numbers of the 

CD player, DVD player, LD 
player, DAT deck, tape deck 
or MD deck. Press 0/10 to 
select track number 10.

– select channel numbers of 

the VCR, satellite tuner, Blu-
ray disc recorder, PSX, 
DVD/VIDEO COMBO, or 
DVD/HDD COMBO.

Press TV (wk), and then press 
the numeric buttons to select 
the TV channels.

J

Press to enter the value after 
selecting a channel, disc or 
track using the numeric 
buttons.
To enter the value of Sony TV, 
press TV (wk), and then press 
ENTER.

Press to store a station.

K

Press to display options 
applicable to the entire disc 
(e.g. disc protection), recorder 
(e.g. audio settings during 
recording), or multiple items 
on a list menu (e.g. erasing 
multiple titles).
To display the options of Sony 
TV, press TV (wk), and then 
press TOOLS.

L

Press AMP to light up the 
button, then press MENU  
(M) to display the menu of 
the receiver.

 

Then, use the 

control buttons to perform 
menu operations.

M

Press to display the menus of 
the VCR, DVD player,  
satellite tuner, Blu-ray disc 
recorder, PSX, DVD/VIDEO 
COMBO, or DVD/HDD 
COMBO. on the TV screen. 
Then, use the control buttons 
to perform menu operations.
To display the menus of Sony 
TV, press TV (wk), and then 
press MENU.

N .

>

Press to skip tracks of the 
VCR, CD player, VCD player, 
LD player, DVD player, MD 
deck, DAT deck, tape deck, 
Blu-ray disc recorder, PSX, 
DVD/VIDEO COMBO, or 
DVD/HDD COMBO.

Press to replay the previous 
scene or fast forward the 
current scene of the VCR, 
DVD player, DVD/VIDEO 
COMBO, or DVD/HDD 
COMBO.

m

M

Press to
– search tracks in the forward/

backward direction of the 
DVD player, LD player, MD 
deck, Blu-ray disc recorder, 
PSX, DVD/VIDEO 
COMBO, or DVD/HDD 
COMBO.

– fast forward/rewind of the 

VCR, CD player, MD deck, 
DAT deck or tape deck.

H

Press to start playback of the 
VCR, CD player, VCD player, 
LD player, DVD player, MD 
deck, tape deck, Blu-ray disc 
recorder, PSX, DVD/VIDEO 
COMBO, or DVD/HDD 
COMBO.

Press to skip disc of the CD 
player, VCD player, DVD 
player, MD deck or LD player 
(multi-disc changer only).

X

Press to pause playback or 
recording of the VCR, CD 
player, VCD player, LD 
player, DVD player, MD 
deck, DAT deck, tape deck, 
Blu-ray disc recorder, PSX, 
DVD/VIDEO COMBO, or 
DVD/HDD COMBO. (Also 
starts recording with 
components in recording 
standby.)

<

<

GB

qf

x

Press to stop playback of the 
VCR, CD player, VCD player, 
LD player, DVD player, MD 
deck, DAT deck, tape deck, 
Blu-ray disc recorder, PSX, 
DVD/VIDEO COMBO, or 
DVD/HDD COMBO.

Press to scan a station.

O

Press TV (wk), and then press 
TV CH +/– to select preset TV 
channels.

Press to select
– preset stations.
– preset channels of the VCR, 

satellite tuner, Blu-ray disc 
recorder, DVD, DVD/
VIDEO COMBO, or DVD/
HDD COMBO.

P

Press to select the media (for 
DVD/VIDEO COMBO and 
DVD/HDD COMBO models 
only).

Press TV (wk), and then press 
WIDE to select the wide 
picture mode.
Press to select the media (for 
DVD/VIDEO COMBO and 
DVD/HDD COMBO models 
only)

Press TV (wk) and then press 
TV/VIDEO to select the input 
signal (TV input or video 
input).

Q

Press to display the DVD title 
of the DVD player on the TV 
screen. Then, use the control 
buttons to perform menu 
operations.

Press to display the menu of 
the DVD player on the TV 
screen. Then, use the control 
buttons to perform menu 
operations.

R

 

Press TV (wk) and then press 
TV VOL +/– to adjust the TV 
volume level.

 

Press to adjust the volume 
level of all speakers at the 
same time.

Press to mute the sound.
To mute the sound of the TV, 
press TV (wk) and then press 
MUTING.

S

 

O

Press to
– return to the previous menu.
– exit the menu while the 

menu or on-screen guide of 
the VCR, DVD player, LD 
player, Blu-ray disc 
recorder, PSX or satellite 
tuner is displayed on the TV 
screen.

To return to the previous menu 
of Sony TV, press TV (wk), 
and then press RETURN/
EXIT O.

T

After pressing AMP (L), 
then MENU M for receiver 
operation DVD TOP MENU 
qj or DVD MENU qj, press 
the control button V, v, B or b 
to select the settings. When 
you press DVD TOP MENU 
or DVD MENU, press the 
control button to enter the 
selection.

U

Press to select information 
displayed on the TV screen of 
the VCR,VCD player, 
satellite tuner, CD player, 
DVD player, MD deck, Blu-
ray disc recorder, PSX, DVD/
VIDEO COMBO, or DVD/
HDD COMBO.

GB

a)

The number 5, PRESET +, TV CH +, and H 
buttons have tactile dots. Use the tactile dots as 
references when operating the receiver.

• Some functions explained in this section may not 

work depending on the model.

• The above explanation is intended to serve as an 

example only. Therefore, depending on the 
component, the above operation may not be 
possible or may operate differently than described.

V

Press to select the channel 
entry mode, either one or two 
digits of the Blu-ray disc 
recorder or satellite tuner.
To select the channel mode of 
the TV, press TV (wk) and 
then press -/--.

Press to select track numbers 
over 10 of the VCR, satellite 
tuner, CD player or MD deck, 
tape deck, TV, Blu-ray disc 
recorder or PSX.

Press to
– clear a mistake when you 

press the incorrect numeric 
button.

– return to continuous 

playback, etc. of the satellite 
tuner, Blu-ray disc recorder, 
PSX, DVD/VIDEO 
COMBO, or DVD/HDD 
COMBO.

W

Press to select FM monaural 
or stereo reception.

X

Press to activate the Sleep 
Timer function and the 
duration which the receiver 
turns off automatically.

Y

Press to select 2CH STEREO 
mode.

Z

Press to select A.F.D. mode.

wj

Press to select the audio 
directly from the components 
connected to MULTI CH IN 
jacks (page 39).

wk

Press to light up the button. It 
changes the remote key 
function to activate the 
buttons with orange printing.
It also activate the TOOLS 
(qa), MENU (qd), 
RETURN/EXIT O (ql), 
and DISPLAY (wa) buttons to 
perform menu operations for 
Sony TVs only.

wl

Press to set-up the remote.