STR-DG2100 - Sony Audio Service Manual (repair manual). Page 2

2

Tuning range

With 10-kHz tuning scale

530 – 1,710 kHz

3)

With 9-kHz tuning scale

531 – 1,710 kHz

3)

Antenna (aerial)

Loop antenna (aerial)

3)

You can change the AM tuning scale to either 9 
kHz or 10 kHz. After tuning in any AM  station, 
turn off the receiver. While holding down 
TUNING MODE, press POWER on the receiver. 
All preset stations will be erased when you change 
the tuning scale. To reset the scale to 10 kHz (or 9 
kHz), repeat the procedure.

Inputs/Outputs

Video:

1 Vp-p, 75 ohms

COMPONENT VIDEO:

Y: 1 Vp-p, 75 ohms

P

B

/C

B

: 0.7 Vp-p, 75 ohms

P

R

/C

R

: 0.7 Vp-p, 75 ohms

80 MHz HD Pass Through

Input/Output (HDMI Repeater block)

640 

× 480p@60 Hz

720 

× [email protected]/60 Hz

1440 

× [email protected]/60 Hz (pixel sent 2times)

1280 

× [email protected]/60 Hz

1920 

× [email protected]/60 Hz

1920 

× [email protected]/60 Hz

720 

× 576p@50 Hz

1440 

× 576p@50 Hz (pixel sent 2times)

1280 

× 720p@50 Hz

1920 

× 1080i@50 Hz

1920 

× 1080p@50 Hz

1920 

× 1080p@24 Hz

Power requirements 120 V AC, 60 Hz

Power output (DIGITAL MEDIA PORT)

DC OUT: 5 V, 700 mA

Power consumption 350 W

Power consumption (during standby mode)

0.7 W (when “HDMI 
Control” is set to “OFF”)

Dimensions

430 

× 175 × 430 mm 

(width/height/depth)
including projecting parts 
and controls

Mass (Approx.)

14.5 kg

Operating Instructions

Quick Setup Guide (1)

HDMI CONTROL Guide (1)

GUI Menu List (1)

Optimizer microphone ECM-AC2 (1)

FM wire antenna (aerial) (1)

AM loop antenna (aerial) (1)

Remote commander RM-AAP018 (1)

R6 (size-AA) batteries (2)

Design and specifications are subject to 
change without notice.

Tuning range

87.5 – 108.0 MHz

Antenna (aerial)

FM wire antenna (aerial)

Antenna (aerial) terminals

75 ohms, unbalanced