STR-DE598, STR-DE698, STR-DV10 - Sony Audio Service Manual (repair manual). Page 2

2

Models of area code AEP, UK, E2, AUS, AR, KR, TW
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

80 W + 80 W

 1)

(EXCEPT AEP, UK)
90 W + 90 W

 1)

 (AEP, UK)

70 W + 70 W

 3)

(8 ohms 1 kHz, THD 0.7 %)

100 W + 100 W

 1)

90 W + 90 W

 3)

(8 ohms 1 kHz, THD 10 %)

120 W + 120 W

 1)

(EXCEPT AEP, UK)
125 W + 125 W

 1)

 (AEP, UK)

110 W + 110 W

 3)

Reference Power Output

 1)

(8 ohms 20 Hz – 20 kHz, THD 0.09 %)

FRONT

 2)

 : 110 W/ch

CENTER

 2)

 : 110 W

SURR

 2)

 : 110 W/ch

SURR BACK

 2)

 :

110 W (DE598)
110 W/ch (DE698)

(8 ohms 1 kHz, THD 0.7 %)

FRONT

 2)

 : 120 W/ch

CENTER

 2)

 : 120 W

SURR

 2)

 : 120 W/ch

SURR BACK

 2)

 :

120 W (DE598)
120 W/ch (DE698)

(8 ohms 1 kHz, THD 10 %)

FRONT

 2)

 : 150 W/ch

CENTER

 2)

 : 150 W

SURR

 2)

 : 150 W/ch

SURR BACK

 2)

 :

150 W (DE598)
150 W/ch (DE698)

1) Measured under the following conditions:

Area code

Power requirements

US, CND

120 V AC, 60 Hz

AEP, UK, AR, KR

230 V AC, 50 Hz

E2, AUS

240 V AC, 50 Hz

TW

110 V AC, 60 Hz

2) Depending on the sound field settings and the

source, there may be no sound output.

3) Measured under the following conditions:

Area code

Power requirements

AR, KR

220 V AC, 50 Hz

Frequency response

MULTI CH IN, SA-CD/

10 Hz – 70 kHz

CD, MD/TAPE, DVD,

+0.5/–2 dB (with sound

AUX (DE698/DV10),

field and tone (DE598) or

VIDEO 1, 2, 3

equalizer (DE698/DV10)
bypassed)

Inputs (Analog)

MULTI CH IN, SA-CD/

Sensitivity: 500 mV

CD, MD/TAPE, DVD,

Impedance: 50 k ohms

AUX (DE698/DV10),

S/N

 4)

 : 96 dB

VIDEO 1, 2, 3

(A, 500 mV

 5)

 )

4) INPUT SHORT (with sound field and tone (DE598) or

equalizer (DE698/DV10) bypassed).

5) Weighted network, input level.

Inputs (Digital)

DVD,

Sensitivity: –

SA-CD/CD (DE698/

Impedance: 75 ohms

DV10) (Coaxial)

S/N: 100 dB
(A, 20 kHz LPF)

VIDEO 2,

Sensitivity: –

3, MD/TAPE (DE698/

Impedance: –

DV10),

S/N: 100 dB

SA-CD/CD (Optical)

(A, 20 kHz LPF)

Outputs (Analog)

MD/TAPE (OUT),

Voltage: 500 mV

VIDEO 1 (AUDIO OUT)

Impedance: 10 k ohms

SUB WOOFER

Voltage: 2 V
Impedance: 1 k ohms

Outputs (Digital) (DE698/DV10)

MD/TAPE (Optical)

Sensitivity: –

Tone (DE598),
Equalizer (DE698/DV10)
Gain levels

±6 dB, 1 dB step

Tuning range

87.5 – 108.0 MHz

Antenna

FM wire antenna

Antenna terminals

75 ohms, unbalanced

Intermediate frequency

10.7 MHz

Sensitivity

Mono:

18.3 dBf, 2.2 µV/75 ohms

Stereo:

38.3 dBf, 22.5 µV/75 ohms

Useable sensitivity

11.2 dBf, 1 µV/75 ohms

S/N

Mono:

76 dB

Stereo:

70 dB

Harmonic distortion at 1 kHz

Mono:

0.3%

Stereo:

0.5%

Separation

45 dB at 1 kHz

Frequency response

30 Hz – 15 kHz,
+0.5/–2 dB

Selectivity

60 dB at 400 kHz

Tuning range

Models of area code US, CND
With 10-kHz tuning scale: 530 – 1,710 kHz

 6)

With 9-kHz tuning scale: 531 – 1,710 kHz

 6)

Models of area code E2
With 10-kHz tuning scale: 530 – 1,610 kHz

 6)

With 9-kHz tuning scale: 531 – 1,602 kHz

 6)

Models of area code AEP, UK, AUS, TW, KR
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code AR
With 10-kHz tuning scale: 530 – 1,610 kHz

Antenna

Loop antenna

Intermediate frequency

450 kHz

Usable sensitivity

50 dB/m (at 1,000 kHz or
999 kHz)

S/N

54 dB (at 50 mV/m)

Harmonic distortion

0.5 % (50 mV/m, 400 Hz)

Selectivity

At 9 kHz:

35 dB

At 10 kHz:

40 dB

6) You can change the AM tuning scale to 9 kHz or 10 kHz.

After tuning in any AM station, turn off the receiver. While
holding down PRESET TUNING + or TUNING +, press
?/1. All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.

Inputs/Outputs

Video:

1 Vp-p, 75 ohms

S-video:

Y: 1 Vp-p, 75 ohms

(DE698/DV10)

C: 0.286 Vp-p, 75 ohms

COMPONENT VIDEO:
(Except for models of area code DE598: AEP, UK)

Y: 1 Vp-p, 75 ohms
P

B

/C

B

/B-Y: 0.7 Vp-p,

75 ohms
P

R

/C

R

/R-Y: 0.7 Vp-p,

75 ohms
80 MHz HD Pass Through