Read Sony STR-DA6400ES Service Manual online
STR-DA6400ES
13
You can use the supplied remote to operate the receiver
and to control the Sony audio/video components
that the remote is assigned to operate.
and to control the Sony audio/video components
that the remote is assigned to operate.
Main remote commander
(RM-AAL012)
(RM-AAL012)
The RM-AAL012 remote is used for illustration
purpose.
purpose.
Remote commander
Name
Function
" AV / (on/
standby)
Press to turn on or off the audio/video
components that the remote is assigned to
operate.
If you press
components that the remote is assigned to
operate.
If you press
/ () button at the same
time, it will turn off the receiver and other
Sony components (SYSTEM STANDBY).
Sony components (SYSTEM STANDBY).
Note
The function of the AV
The function of the AV
/switch changes
automatically each time you press the input
button (
button (
).
# / (on/
standby)
Press to turn the receiver on or off.
If zone 2 or zone 3 is selected, only the
main receiver is turned on or off with this
button. To turn off all components including
an in zone 2 or zone 3, press
If zone 2 or zone 3 is selected, only the
main receiver is turned on or off with this
button. To turn off all components including
an in zone 2 or zone 3, press
/ and AV /
(
) at the same time
(SYSTEM STANDBY).
Saving the power in standby
mode.
mode.
When “Control for HDMI” and “RS-232C
Control” are set to “OFF.”
Control” are set to “OFF.”
$ ZONE
Press to switch the zone 2 or zone 3
operation.
operation.
% AMP
Press to enable the receiver operation.
& Input
buttons
Press one of the buttons to select the
component you want to use. When you
press any of the input buttons, the receiver
turns on. The buttons are factory assigned to
control Sony components. You can program
the remote to control non-Sonycomponents
following the steps in following the steps in
“Programming the remote”.
component you want to use. When you
press any of the input buttons, the receiver
turns on. The buttons are factory assigned to
control Sony components. You can program
the remote to control non-Sonycomponents
following the steps in following the steps in
“Programming the remote”.
' TV INPUT
Press TV (
XG), then press TV INPUT to
select the input signal of a TV.
( WIDE
Press TV (
XG), then press WIDE
repeatedly to select the wide picture mode.
) D.TUNING
Press SHIFT (
XH), then press to enter
direct tuning mode
* CLEAR
Press SHIFT (
XH), then press to
– clear a mistake when you press the
incorrect numeric button.
– return to continuous playback, etc. of
the satellite tuner or DVD player.
+ ENT/MEM
Press SHIFT (
XH), then press ENT/MEM
to enter the value after selecting a channel,
disc, or track using the numeric buttons, or
to store a station during tuner operation.
disc, or track using the numeric buttons, or
to store a station during tuner operation.
, MOVIE
Press to select sound field for movies.
- MUSIC
Press to select sound field for music.
. GUI MODE
Press to switch the display mode of the
menu between GUI MODE (to display the
menu on the TV screen) and DISPLAY
MODE (to display the menu in the display
window).
menu between GUI MODE (to display the
menu on the TV screen) and DISPLAY
MODE (to display the menu in the display
window).
/ HDMI
OUTPUT
Press to select an HDMI jack you want to
output HDMI video signals.
output HDMI video signals.
0 QUICK
CLICK
Press to display the on-screen remote on
the TV the screen.
the TV the screen.
1
7W#C
Press
7/W/#/C to select the menu items.
Then press
to enter the selection.
2 OPTIONS
TOOLS
Press to display and select items from
option menus for receiver, DVD player,
TV, or Blu-ray Disc Player, etc.
option menus for receiver, DVD player,
TV, or Blu-ray Disc Player, etc.
3 MENU
HOME
Press to display the menu used to operate
audio/video components or a TV.
audio/video components or a TV.
Name
Function
Name
Function
4 N/.
a)
Y
a)
9
a)
/
a) b)
/
a)
Press to operate the DVD player, Blu-ray
Disc Player, CD player, MD deck, tape
deck, or component connected to the
DIGITAL MEDIA PORT adapter etc.
Disc Player, CD player, MD deck, tape
deck, or component connected to the
DIGITAL MEDIA PORT adapter etc.
CATEGORY
MODE
MODE
Press to select the category mode for
satellite tuner.
satellite tuner.
TUNING +/–
Press to select station.
5 PRESET
+
b)
/–
Press to register FM/AM/satellite tuner
stations or to select preset stations.
stations or to select preset stations.
TV CH +
b)
/– Press TV (
XG), then press TV CH + /– to
operate the TV, satellite tuner, VCR, etc.
6 F1/F2
Press BD or DVD (
), then press F1 or
F2 to select a component to operate.
• HDD/DISC combo
• HDD/DISC combo
F1: HDD
F2: DVD disc, Blu-ray Disc
F2: DVD disc, Blu-ray Disc
• DVD/VHS combo
F1: DVD disc, Blu-ray Disc
F2: VHS
F2: VHS
PARTY
Press to display confirmation screen to
start party mode.
start party mode.
SLEEP
Press AMP (
), then press SLEEP to
activate the sleep timer function and the
duration which the receiver turns off
automatically.
duration which the receiver turns off
automatically.
7 RM SET UP Press to set up the remote.
8 THEATER
Press to turn the Theater mode on and off
when connecting the receiver to products
featuring “BRAVIA” Sync.
when connecting the receiver to products
featuring “BRAVIA” Sync.
9 TV
Press to enable the TV operation.
: SHIFT
Press to light up the button. It changes the
remote button function to activate the
buttons with pink printing.
remote button function to activate the
buttons with pink printing.
; Numeric
buttons
Press SHIFT (
XH), then press to
– preset/tune to preset stations.
– select track numbers of the
– select track numbers of the
CD player, DVD player, Blu-ray Disc
Player or MD deck.
Press -/-- (
Player or MD deck.
Press -/-- (
XK) to select track number 10.
– select channel numbers of the VCR or
satellite tuner.
– After pressing TV (
XG), press the
numeric buttons to select the TV channels.
XK -/--
Press to
– select track numbers over 10 of the CD
– select track numbers over 10 of the CD
player, DVD player, Blu-ray Disc
Player, or MD deck.
Player, or MD deck.
– select channel numbers over 10 of the
TV, Satellite tuner or the VCR.
XL A.F.D.
Press to select sound field.
XM 2CH/
A.DIRECT
Press to select sound field or to switch the
audio of the selected input to analog
without any adjustment.
audio of the selected input to analog
without any adjustment.
F RESOLUTION Press RESOLUTION repeatedly to
change the resolution of signals output
from the HDMI OUT or COMPONENT
VIDEO MONITOR OUT jack.
from the HDMI OUT or COMPONENT
VIDEO MONITOR OUT jack.
FB PIP
Press PIP to switch the image of the PIP
(Picture in Picture) window. The image
of the PIP window is the one from the
EXT VIDEO IN jack. You can swap the
position of the main screen and the PIP
window by pressing
(Picture in Picture) window. The image
of the PIP window is the one from the
EXT VIDEO IN jack. You can swap the
position of the main screen and the PIP
window by pressing
(
RI).
Note
When the HDMI input is selected on the
main screen, you cannot swap the position
of the main screen and the PIP window.
When the HDMI input is selected on the
main screen, you cannot swap the position
of the main screen and the PIP window.
FT DISPLAY
Press to display the current status of or
information on components connected
to the receiver.
Note
In the GUI MODE, press the button to
display the menu on the TV screen.
information on components connected
to the receiver.
Note
In the GUI MODE, press the button to
display the menu on the TV screen.
a)
See the table for information on the buttons that you can use
to control each component.
to control each component.
b)
The tactile dot is attached to these buttons (TV/5,
/,
PRESET +/TV CH +). Use as a mark of operation.
Notes
• Some functions explained in this section may not work
depending on the model.
• The above explanation is intended to serve as an example
only. Therefore, depending on the component, the above
operation may not be possible or may operate differently
than described.
operation may not be possible or may operate differently
than described.
FE RETURN/
EXIT
0
Press to return to the previous menu or
exit the menu while the menu or on-screen
guide of the VCR, DVD player, or
satellite tuner is displayed on the TV
screen.
exit the menu while the menu or on-screen
guide of the VCR, DVD player, or
satellite tuner is displayed on the TV
screen.
FG CATEGORY
+/–
Press to select the category for satellite
tuner.
tuner.
#·/·C
Press to select an album.
FH DISC SKIP
Press to skip a disc when using a multi-
disc changer.
disc changer.
FI MASTER
VOL +/–
Press to adjust the volume level of all
speakers at the same time.
speakers at the same time.
TV VOL +/–
Press TV (
XG), then press TV VOL +/– to
adjust the volume level of the TV.
FK MUTING
Press to turn off the sound temporarily.
Press the button again to restore the sound.
Press the button again to restore the sound.
FL BD/DVD/
TOP MENU,
MENU
MENU
Press to display the menus of the DVD
the DVD player on the TV screen. Then
use
the DVD player on the TV screen. Then
use
7/W/#/C and
to perform a menu
operations.
MACRO1,
MACRO2
MACRO2
Press AMP (
), then press MACRO 1 or
MACRO 2 to set up the macro function.
Click on the first or last page to see other STR-DA6400ES service manuals if exist.