Read Sony STR-DA5400ES Service Manual online
STR-DA5400ES
11
Indicators on the display
Name
Function
" SW
Lights up when subwoofer
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the L.F.E. signal in the disc
being played back or the
low frequency components
of the front channels.
is connected and the audio
signal is output from the
SUBWOOFER jack. While
this indicator lights up, the
receiver creates a
subwoofer signal based on
the L.F.E. signal in the disc
being played back or the
low frequency components
of the front channels.
# Playback
channel
indicators
indicators
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings).
indicate the channels being
played back. The boxes
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings).
L
Front Left
R
Front Right
C
Center (monaural)
SL
Surround Left
SR
Surround Right
S
Surround (monaural or the
surround components
obtained by Pro Logic
processing)
surround components
obtained by Pro Logic
processing)
SBL
Surround Back Left
SBR
Surround Back Right
SB
Surround Back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: Surround
speakers are set to “NO.”
Sound Field: A.F.D. AUTO
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: Surround
speakers are set to “NO.”
Sound Field: A.F.D. AUTO
L
SW
SL
SR
C
R
$ Input
indicators
Light up to indicate the
current input.
current input.
INPUT
Lights up constantly with
either following the
corresponding indicators
that indicate the current
input status.
either following the
corresponding indicators
that indicate the current
input status.
HDMI
The receiver recognizes a
component connected via
an HDMI IN jacks.
component connected via
an HDMI IN jacks.
DMPORT
The DIGITAL MEDIA
PORT adapter is connected
and “DMPORT” is
selected.
PORT adapter is connected
and “DMPORT” is
selected.
MULTI IN
The multi-channel input is
selected.
selected.
AUTO
Lights up with the
corresponding indicators
that indicate the current
input when INPUT MODE
is set to “Auto.”
corresponding indicators
that indicate the current
input when INPUT MODE
is set to “Auto.”
OPT
Digital signal is input
through the OPTICAL jack.
through the OPTICAL jack.
ANALOG
No digital signal is being
input. When INPUT
MODE is set to “Analog,”
or when the “2ch Analog
Direct” is being selected, it
also lights up.
input. When INPUT
MODE is set to “Analog,”
or when the “2ch Analog
Direct” is being selected, it
also lights up.
% EQ
Lights up when the
equalizer is activated.
equalizer is activated.
& HDMI A B
Lights up when the signals
are output from the HDMI
OUT A or B jack.
are output from the HDMI
OUT A or B jack.
' D.C.A.C.
Lights up when auto
calibration is activated.
calibration is activated.
( ZONE 2/
ZONE 3
Lights up while operation in
zone 2/zone 3 is being
enabled.
zone 2/zone 3 is being
enabled.
Name
Function
) SLEEP
Lights up when the sleep
timer is activated.
timer is activated.
* L.F.E.
Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
+ DSD
Lights up when the receiver
is receiving DSD (Direct
Stream Digital) signals.
is receiving DSD (Direct
Stream Digital) signals.
, Tuning
indicators
Lights up when the receiver
tunes in radio stations, or
satellite radio stations.
tunes in radio stations, or
satellite radio stations.
STEREO
Stereo broadcast
MONO
Monaural broadcast
XM
(U.S.A./
Canadian
model only)
(U.S.A./
Canadian
model only)
The XM Mini Tuner and
Home Dock are connected
and “XM” is selected.
Home Dock are connected
and “XM” is selected.
SIRIUS
(U.S.A./
Canadian
model only)
(U.S.A./
Canadian
model only)
The SiriusConnect Home
tuner is connected and
“SIRIUS” is selected.
tuner is connected and
“SIRIUS” is selected.
CAT
(U.S.A./
Canadian
model only)
(U.S.A./
Canadian
model only)
The category mode is
selected during the satellite
radio operation.
selected during the satellite
radio operation.
RDS
(European
model only)
(European
model only)
RDS information is
received.
received.
PRESET
The tuning mode is set to
the preset mode.
the preset mode.
MEMORY
A memory function, such as
Name Input, etc., is
activated.
Name Input, etc., is
activated.
- H.A.T.S.
(European
model only)
model only)
Lights up when the
H.A.T.S. (High quality
digital Audio Transmission
System) function is
activated.
H.A.T.S. (High quality
digital Audio Transmission
System) function is
activated.
. BI-AMP
Lights up when surround
back speakers selection is
set to “BI-AMP.”
back speakers selection is
set to “BI-AMP.”
/ D.RANGE
Lights up when dynamic
range compression is
activated.
range compression is
activated.
0 VOLUME
Displays the current
volume.
volume.
Name
Function
1 Dolby
Digital
Surround
indicators
Surround
indicators
Lights up one of the
respective indicators when
the receiver is decoding the
corresponding Dolby
Digital format signals.
respective indicators when
the receiver is decoding the
corresponding Dolby
Digital format signals.
D
Dolby Digital
D+
Dolby Digital Plus
D EX
Dolby Digital Surround EX
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “Analog.”
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “Analog.”
2 DTS-HD
indicators
Light up when the receiver
is decoding DTS-HD.
is decoding DTS-HD.
DTS-HD
Lights up constantly with
the one of the following
indicators.
the one of the following
indicators.
MSTR
DTS-HD Master Audio
LBR
DTS-HD Low Bit Rate
Audio
Audio
HI RES
DTS-HD High Resolution
Audio
Audio
3 TrueHD
Lights up when the receiver
is decoding Dolby TrueHD.
is decoding Dolby TrueHD.
4 L-PCM
Lights up when Linear
PCM (Pulse Code
Modulation) signals are
input.
PCM (Pulse Code
Modulation) signals are
input.
5 Dolby
Pro Logic
indicators
indicators
Lights up one of the
respective indictors when
the receiver applies Dolby
Pro Logic processing to 2
channel signals in order to
output the center and
surround channel signals.
respective indictors when
the receiver applies Dolby
Pro Logic processing to 2
channel signals in order to
output the center and
surround channel signals.
PL
Dolby Pro Logic
PLII
Dolby Pro Logic II
PLIIx
Dolby Pro Logic IIx
Note
This indicator does not light
when either the center speaker
and surround speaker is not
connected.
This indicator does not light
when either the center speaker
and surround speaker is not
connected.
6 DTS(-ES)
indicators
Light up when DTS or
DTS-ES signals are input.
DTS-ES signals are input.
DTS
Lights up when the receiver
is decoding DTS signals.
Either 96/24 or NEO:6 also
lights up depending on the
input signal format or
decoding format.
is decoding DTS signals.
Either 96/24 or NEO:6 also
lights up depending on the
input signal format or
decoding format.
96/24
DTS 96/24 (96 kHz/24 bit)
decoding
decoding
NEO:6
DTS Neo:6 Cinema/Music
DTS-ES
Lights up with the either
following indicator
depending on the input
signal decoding format.
following indicator
depending on the input
signal decoding format.
DISCRETE DTS-ES Discrete 6.1
MATRIX
DTS-ES Matrix 6.1
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
“Analog.”
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
“Analog.”
7 Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.
processing to input signals.
COAX
Digital signal is input
through the COAXIAL
jack.
through the COAXIAL
jack.
Click on the first or last page to see other STR-DA5400ES service manuals if exist.