STR-DA5200ES - Sony Audio Service Manual (repair manual). Page 14

14

This remote is only for zone 2/zone 3 
operations. You cannot control the main 
receiver directly with this remote.

A ?

1

Press to turn a receiver in zone 2 
or zone 3 on or off.

B

Press to select the command 
mode of the remote.

C

Press one of the buttons to 
select the component you want 
to use. When you press any of 
the input buttons, the receiver 
turns on. The buttons are 
factory assigned to control Sony 
components as follows.

D

Press to mute the sound.

E

Press to adjust the volume level 
for multi zone output.

F

Press to change the category of 
the buttons.

G

Lights up when data is being 
sent or when the remote button 
assignment is being preset.

* The setting cannot be changed.

VIDEO 1

VCR (VTR mode 3)

VIDEO 2

VCR (VTR mode 1)

VIDEO 3

VCR (VTR mode 2)

DVD

DVD player

TV/SAT

TV tuner

TAPE/
CD-R

Tape deck B

MD/DAT

MD deck

SA-CD/CD Super Audio CD/CD 

player

TUNER*

Built-in tuner

SOURCE

The current input 
selected for the main 
receiver

*

The function of these buttons switches 
automatically each time you press the input 
buttons C. The above explanation is intended to 
serve as an example only. Therefore, depending 
on the component, the above operation may not 
be possible or may operate differently than 
described.

H

The following table describes 
the function of the buttons.

I

Press repeatedly to select a 
preset station or channel. When 
using a multi-disc changer, 
press to skip a disc.

N

Starts play. (Starts play 
on the front side of the 
cassette.)

n

Starts play on the 
reverse side of the 
cassette.

X

Pauses play or 
recording, and starts 
recording when the 
component is in 
recording standby.

x

Stops play.

./>

Skips tracks.

m/M

Go backward/forward.