Read Sony STR-DA5200ES Service Manual online
13
STR-DA5200ES
You can use the supplied remote RM-AAL005 to
operate
the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
components that the remote is assigned to operate.
RM-AAL005
Remote commander
Name
Function
A
AV
?
/
1
(on/
standby)
Press to turn on or off the audio/video
components that the remote is assigned to
operate.
components that the remote is assigned to
operate.
If you press the ?/1 (B) at the same time,
it will turn off the receiver and other Sony
components (SYSTEM STANDBY).
components (SYSTEM STANDBY).
Note
The function of the AV ?/1 switchchanges
automatically each time youpress the input
automatically each time youpress the input
button (C).
B ?
/
1
(on/
standby)
Press to turn the receiver on or off.
If ZONE 2 or ZONE 3 is selected, only the
main receiver is turned on oroff with this
button. To turn off all components
including an amplifier in zone 2 or zone 3,
main receiver is turned on oroff with this
button. To turn off all components
including an amplifier in zone 2 or zone 3,
press ?/1 and AV ?/1 (A) at the same
same time (SYSTEM STANDBY).
C
Input
buttons
buttons
Press one of the buttons to select the
component you want to use.
component you want to use.
Press a pink-labeled button after pressing
SHIFT (wj). When you press any of the
SHIFT (wj). When you press any of the
input buttons, the receiver turns on.
The buttons are factory assigned to control
Sony components. You can program the
remote to to control non-Sony components
following the steps in “Programming the
remote”.
Sony components. You can program the
remote to to control non-Sony components
following the steps in “Programming the
remote”.
D
RECEIVER
Press to enable the receiver operation.
E
ZONE 2
ZONE 3
ZONE 3
Press to enable the zone 2/zone 3
operation.
operation.
F
PIP
Press SHIFT (wj), then press PIP toswitch
the image of the PIP (Picture in Picture)
window.
The image will be changed as follows.
window.
The image will be changed as follows.
EXT VIDEO t ZONE 2 VIDEO t
OFF. You canalso change the size of the
PIP window by pressing V/v.
Note
The HDMI video signals are not output
while the PIP window is displayed.
MUSIC
Press to select sound field.
G
RESOLUTION
Press SHIFT (wj) then press
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT
resolution of signals output from the
HDMI OUT or COMPONENT
VIDEO MONITOR OUT jack.
MOVIE
Press to select sound field.
H
Numeric
buttons
buttons
Press to
− preset/tune to preset stations.
− select track numbers of the CD player,
− preset/tune to preset stations.
− select track numbers of the CD player,
DVD player or MD deck. Press 0/10 to
select track number 10.
− select channel numbers of the VCR or
satellite tuner.
− After pressing TV (wk), press the
numeric buttons to select the TV
channels.
channels.
I
ENTER
Press to enter the value after selecting a
channel, disc or track using the numeric
buttons.
channel, disc or track using the numeric
buttons.
MEMORY
Press to store a station during tuner
operation.
operation.
J
DISPLAY
Press to select information displayed on the
display window, TV screen of the VCR,
satellite tuner, CD player, DVD player, or
MD deck.
display window, TV screen of the VCR,
satellite tuner, CD player, DVD player, or
MD deck.
K
V/v/B/b
After pressing MENU (qd) or TOP MENU
(qk), press V/v, B or b to select the
(qk), press V/v, B or b to select the
settings. Then press
selection.
selection.
to enter the
Name
Function
L
OPTIONS
Press to display and select items from option
menus for receiver and DVD player.
menus for receiver and DVD player.
TOOLS
Press to display and select items from option
menus for DVD player, etc.
M
MENU
Press to display the menu of the
receiver of a DVD player, TV, etc.
N
CATEGORY
+/–
+/–
Press to select the category for XM Radio.
ALBUM +/–
Press to replay the previous scene or fast
forward the current scene of the VCR or
forward the current scene of the VCR or
DVD player.
O m
/
M
x
X
H
H
b)
.
/
>
Press to operate the DVD player, CD
player, MD deck or tape deck, etc.
player, MD deck or tape deck, etc.
CATEGORY
MODE
MODE
Press to select the category mode for XM
Radio.
Radio.
TUNING +/–
Press to selest station.
P
PRESET
+
+
b)
/–
Press to register FM/AM/XM Radio
stations or to select preset stations.
stations or to select preset stations.
TV CH +/ –
Press TV (wk) and then press TV CH+/
−
to operate the TV, satellite tuner, VCR, etc.
Q
F1/F2
Press TV (wk) and then press F1 or F2 to
select a component to operate.
• HDD recorder
• HDD recorder
F1: HDD
F2: DVD
F2: DVD
• DVD/VHS combo player
F1: DVD
F2: VHS
F2: VHS
TV/VIDEO
Press TV/VIDEO and TV (wk) atthe same
time to select the input signal (TV input or
video input).
time to select the input signal (TV input or
video input).
WIDE
Press to select the wide picture mode.
MACRO1,
MACRO2
MACRO2
Press RECEIVER (4) and then press
MACRO 1 or MACRO 2 to set up the
macro function.
macro function.
Name
Function
b)
The tactile dot is attached to these buttons (H, PRESET+).
Use as a mark of operation.
Use as a mark of operation.
Notes
• Some functions explained in this section may not work
depending on the model.
• The above explanation is intended to serve as an example only.
Therefore, depending on the component, the above operation
may not be possible or may operate differently than described.
may not be possible or may operate differently than described.
R
TOP MENU
Press to display the menu or on-screen
guide of the DVD player on the TV screen.
Then use V/v/B/b and
guide of the DVD player on the TV screen.
Then use V/v/B/b and
to perform
menu operations.
MENU
Press to display the menus of the DVD
player on the TV screen. Then use
V/v/B/b and
V/v/B/b and
operations.
NIGHT
MODE
MODE
Press RECEIVER (4) and then press
NIGHT MODE to activate the NIGHT
NIGHT MODE to activate the NIGHT
MODE function.
INPUT
MODE
MODE
Press RECEIVER (4) and then press
INPUT MODE to select the input mode
when the same components are connected
when the same components are connected
to both digital and analog jacks.
S
MUTING
Press to silence the sound.
T
MASTER
VOL +
VOL +
b)
/–
Press to adjust the volume level of all
speakers at the same time.
speakers at the same time.
TV VOL +/–
Press TV (wk) and then press TV VOL +/
−
to adjust the volume level of the TV.
U
DISC SKIP
Press to skip a disc when using a multi-disc
changer.
changer.
V
RETURN/
EXIT
EXIT
O
Press to return to the previous menu or exit
the menu while the menu or on-screen guide
the menu while the menu or on-screen guide
of the VCR, DVD player, or satellite tuner
is displayed on the TV screen.
W
ON SCREEN
Press to turn the GUI display mode on or
off. Press MENU (qd) to display the menu
off. Press MENU (qd) to display the menu
when “GUI ON” appears on the display.
X
CLEAR
Press to
− clear a mistake when you press the
− clear a mistake when you press the
incorrect numeric button.
− return to continuous playback, etc. of
the satellite tuner or DVD player.
>10
Press to select
− track numbers over 10 of the VCR,
− track numbers over 10 of the VCR,
satellite tuner, CD player or MD deck.
− channel numbers of the Digital CATV
terminal.
D.TUNING
Press to enter direct tuning mode.
Y
A .DIRE CT
Press SHIFT (wj) then press A.DIRECT
to switch the audio of the selected input to
analog signal without any adjustment.
2CH
Press to select sound filed.
Z
SLEEP
Press SHIFT (wj) then press SLEEP to
activate the Sleep Timer function and the
activate the Sleep Timer function and the
duration which the receiver turns off
automatically.
automatically.
A.F.D
Press to select sound filed.
wj
SHIFT
Press to light up the button. It changes the
remote button function to activate the
buttons with pink printing.
remote button function to activate the
buttons with pink printing.
wk
TV
Press to enable the TV operation.
wl
RM SET UP
Press to set up the remote.
to perform a menu
Click on the first or last page to see other STR-DA5200ES service manuals if exist.