STR-DA3600ES - Sony Audio Service Manual (repair manual). Page 6

Note: When this confi rmation is executed, IP address is changed.

Necessary machinery and materials:
• 

PC (Windows XP/Vista)

• Router
 

(Transmission rate is 100 Mbps or more, built-in DHCP server 
function)

• 

Two LAN cables

 

(Category 5 cable, normal type or shield type)

• Monitor
• 

Multifunction remote commander

 

(RM-AAL034, RM-AAL035 or RM-AAL036)

Connection:
(The router need not be connected with the internet)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment. 

 

It changes to the setting that displays the image in the monitor.

2.  The above-mentioned connection is done. 
3.  The power supply of the router is turn on, next, the power sup-

ply of PC and the set is turn on.

4.  Press the [GUI MODE] button of the remote commander, the 

GUI screen is displayed in the monitor.

5.  The “Settings” is selected on the GUI screen. 
 

Next, “Network Setup” in “Network” is selected, and press the 
[ENTER] button of remote commander.

6.  When the network setting is a unsetting, “Next” is selected on 

the screen of “Start Network function initial Setup Wizard”, 
and press the [ENTER] button of remote commander.

7.  “Connect Automatically (DHCP)” is selected on the screen of 

“Confi gures network settings automatically or manually”, and 
press the [ENTER] button of remote commander.

8.  The automatically connect function operates, it becomes the 

screen of “Success!” tens of seconds later, the confi rmation 
ends when “Finish” is selected.

NOTE  OF  REPLACING  THE  NETWORK  BOARD
When the NETWORK board is exchanged, the MAC address has 
been changed.
Please print and cut out the following explanations, and return it 
with the set that completes the repair.

MAC address of this receiver has been changed by this repair. 
The customer who uses the MAC address fi ltering function of 
connected access point equipment please set it again. MAC ad-
dress is possible to confi rm it on the network setting screen of ES 
utility of an attachment application. 

CAPACITOR  ELECTRICAL  DISCHARGE  PROCESSING
When checking the board, for the electric shock prevention, con-
nect the resistors to both ends of respective capacitors (C801 and 
C802 on the MAIN board) to discharge the capacitors (C801 and 
C802 on the MAIN board).

:/2 W

:/2 W