Read Sony STR-DA2000ES / STR-DB2000 Service Manual online
2
STR-DA2000ES/DB2000
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Sensitivity
Mono:
Mono:
18.3 dBf, 2.2
µ
V/75 ohms
Stereo:
38.3 dBf, 22.5
µ
V/75 ohms
Useable sensitivity
11.2 dBf, 1
µ
V/75 ohms
S/N
Mono: 76
Mono: 76
dB
Stereo: 70
dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation
Mono: 0.3%
Stereo: 0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
STR-DA2000ES:
STR-DA2000ES:
530 – 1,710 kHz
4)
(With 10-kHz tuning scale)
531 – 1,710 kHz
531 – 1,710 kHz
4)
(With 9-kHz tuning scale)
STR-DB2000:
531 – 1,602 kHz
(With 9-kHz tuning scale)
(With 9-kHz tuning scale)
Antenna
Loop antenna
Usable sensitivity
50 dB/m (at 1,000 kHz or 999
kHz)
kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
At 9 kHz:
35 dB
At 10 kHz:
40 dB
4) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
General
Power requirements
Power consumption
Power consumption (during standby mode)
1 W
Dimensions
430
×
161
×
400 mm
including projecting parts and
controls
controls
Mass (Approx.)
10 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
STR-DA2000ES:
AM loop antenna (1)
STR-DA2000ES:
Remote commander RM-LG112 (1)
R6 (size-AA) batteries (2)
R6 (size-AA) batteries (2)
STR-DB2000:
Remote commander RM-PP412 (1)
R6 (size-AA) batteries (2)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
without notice.
Area code
Power requirements
STR-DA2000ES
120 V AC, 60 Hz
STR-DB2000: AEP, UK
230 V AC, 50/60 Hz
STR-DB2000: Singapore, Malaysia
220-230 V AC, 50/60 Hz
Area code
Power consumption
Except STR-DA2000ES: Canadian
170 W
STR-DA2000ES : Canadian
300 VA
Click on the first or last page to see other STR-DA2000ES / STR-DB2000 service manuals if exist.