STR-DA1800ES - Sony Audio Service Manual (repair manual). Page 5

2.  Checking method of wired LAN operation
Check that access point is recognized surely.

Necessary machinery and materials:
•  PC (Windows XP/Vista)
• Router
 

(Transmission rate is 100 Mbps or more, built-in DHCP server 
function)

•  Two LAN cables
 

(Category 5 cable, normal type or shield type)

• Monitor
•  Supplied multifunction remote commander (RM-AAP080)

Connection:
(The router need not be connected with the internet)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment.

 

It changes to the setting that displays the image on the monitor.

2.  Perform connection with reference to connection fi gure.
3.  The power supply of the router is turn on, next, the power sup-

ply of PC and this unit is turn on.

4.  Press the [MENU] button of the remote commander, the menu 

is displayed on the monitor.

5. Press the [

V

]/[

v

] buttons of the remote commander to select 

the “

 Settings” on the menu, and press the [ ] button or [

b

] 

button of remote commander.

6. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the 

“Network”, and press the [ ] button or [

b

] button of remote 

commander.

7. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the 

“Settings”, and press the [ ] button of remote commander.

8. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the 

“Wireless LAN Settings”, and press the [ ] button of remote 
commander.

 

(If the “Change Settings?” appears on the monitor, select the 
“OK”, and press the [ ] button of remote commander)

9. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the  

“Auto”, and press the [ ] button of remote commander.

 

The proxy setting display appears on the monitor.

10. Press the [

V

]/[

v

] buttons of the remote commander to select the  

“Do Not Use”, and press the [ ] button of remote commander.

 The 

confi rmation display appears on the monitor.

11.  Press the [

V

]/[

v

] buttons of the remote commander to select the  

“OK”, and press the [ ] button of remote commander.

 

“Connecting” appears on the monitor.

12. Check that the“Complete!” appears after the network settings 

are completed. Press the [ ] button of remote commander.

13. Press the [\/1] button to turn off the main power.

Note: Refer to the instruction manual about details of the setting method.

CHECKING  METHOD  OF  NETWORK  OPERATION
It is necessary to check the network operation, when replacing the
network module (NW1) or the complete D-VIDEO NW board. 
Check the operation of wireless and wired LAN, according to the 
following method.

Note: When this confi rmation is executed, IP address is changed.

1.  Checking Method of Wireless LAN Operation
Check that access point is recognized surely.

Necessary machinery and materials:
•  PC (Windows XP/Vista)
•  Wireless LAN router/access point
• Monitor
•  Supplied multifunction remote commander (RM-AAP080)

Procedure:
1.  The setting of LAN of PC is setting to the automatic IP address 

assignment.

 

It changes to the setting that displays the image on the monitor.

2.  Perform connection with reference to connection fi gure.
3.  The power supply of the wireless LAN router/access point is 

turn on, next, the power supply of PC and this unit is turn on.

4.  Press the [MENU] button of the remote commander, the menu 

is displayed on the monitor.

5.  Press the [

V

]/[

v

] buttons of the remote commander to select 

the “

 Settings” on the menu, and press the [ ] button or [

b

] 

button of remote commander.

6. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the 

“Network”, and press the [ ] button or [

b

] button of remote 

commander.

7. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the 

“Settings”, and press the [ ] button of remote commander.

8. Press 

the 

[

V

]/[

v

] buttons of the remote commander to select the 

“Wireless LAN Settings”, and press the [ ] button of remote 
commander.

 

(If the “Change Settings?” appears on the monitor, select the 
“OK”, and press the [ ] button of remote commander)

9.  Press the [

V

]/[

v

] buttons of the remote commander to select 

the “Access Point Scan”, and press the [ ] button of remote 
commander.

10. This unit starts searching for access points, and displays a list 

of up to 30 available network name (SSID).

11. Check that access point (SSID) is displayed on the searching 

result.

12. Press the [\/1] button to turn off the main power.

Note: Refer to the instruction manual about details of the setting method.