Read Sony SS-SX7 Service Manual online
SS-SX7
3
1-3. TWEETER BLOCK
2 two hex. socket
screws
(3.5)
1 two catch pins
4 All bosses are removed while
moving jig in the direction of
the arrow, and TW panel
block is removed.
4 All bosses are removed while
moving jig in the direction of
the arrow, and TW panel
block is removed.
3 Insert the jig into a space and raise
TW panel block.
Note: When using a jig, please work so
as not to injure TW panel block.
3 Insert the jig into a space and raise
TW panel block.
Note: When using a jig, please work so
as not to injure TW panel block.
total four bosses
5 Pull out the tweeter block.
7 tweeter block
terminal
(wide side)
(wide side)
terminal
(narrow side)
(narrow side)
– Rear view –
– Rear view –
protrusion
protrusion
6 Push the protrusion,
and remove the
terminal (narrow side).
6 Push the protrusion,
and remove the
terminal (wide side).
JIG
When disassembling the unit, use the following
jig for speaker removal.
jig for speaker removal.
Part No.
Description
J-2501-238-A JIG FOR SPEAKER REMOVAL
Click on the first or last page to see other SS-SX7 service manuals if exist.