Read Sony SS-NA8ES Service Manual online
SS-NA8ES
7
2-5. TERMINAL BOARD ASSY (TB1)
1
2
4
3
Note 1: When installing screws (3.5 × 20),
follow the installing procedure in
the numerical order given.
tightening torque :
.2 0.05 1m
Note 2: Please check direction of the upper and lower sides of terminal packing.
(Narrow side is the upper. Wide side is the bottom.)
Note 3: Check that terminal packing has not run aground with a terminal part.
Note 4: Push the whole terminal packing with a finger. Check the terminal packing
Note 4: Push the whole terminal packing with a finger. Check the terminal packing
not having shifted, not having floated or not being stuck.
Note 5: Check that terminal packing is not showing from screw holes of the terminal
board assy (TB1).
1 four screws
(3.5
u 20)
2 Pull out the terminal
board assy (TB1).
5 terminal board assy (TB1)
terminal board
assy “–” terminal
assy “–” terminal
terminal board
assy “+” terminal
assy “+” terminal
3 terminal
(black)
terminal (black)
terminal (black)
3 terminal (red)
terminal (red)
terminal (red)
terminal
(black)
(black)
WO bord wire
(black)
(black)
WO bord wire
(red)
(red)
terminal
(red)
(red)
4 terminal
packing
terminal packing
caulking
part
part
caulking
part
part
Narrow side
upper side
Wide side
– Rear side view –
– Top side view –
Note 6: Check direction of terminals.
(terminal (black) is left side.
terminal (red) is right side.)
Note 7: Check that the caulking part of a terminal
has faced upward.
Note 8: Be careful not to attach a crack to a speaker
cabinet using the terminal of a wire.
Note 9: Check whether the terminal is inserted
conversely.
Note 10: Insert the terminal straightly.
Note 11: After terminal insertion, should check
conversely.
Note 10: Insert the terminal straightly.
Note 11: After terminal insertion, should check
acting as lock of the terminal completely.
:ire seWWiQJ
,QsWaOOed posiWioQ oI WerPiQaO paFNiQJ
Click on the first or last page to see other SS-NA8ES service manuals if exist.