Read Sony SS-NA8ES Service Manual online
SS-NA8ES
5
2-3. TWEETER
ASSY
1
2
3
5
4
6
1 three screws
(3.5
u 20)
2 Pull out the tweeter assy.
3 terminal (gray)
3 terminal
(yellow)
3 terminal
(yellow/black)
3 terminal
(orange)
1 three screws
(3.5
u 20)
speaker cabinet
Speaker cabinet
concave portion
concave portion
TW board
“AT–” wire (gray)
“AT–” wire (gray)
TW board
“AT+” wire (orange)
“AT+” wire (orange)
TW board
“TW–” wire (yellow/black)
“TW–” wire (yellow/black)
TW board
“TW+” wire (yellow)
“TW+” wire (yellow)
loudspeaker (1.9 cm)
(assist tweeter: lowerside)
(SP4) “–” wire (black)
(assist tweeter: lowerside)
(SP4) “–” wire (black)
loudspeaker (1.9 cm)
(assist tweeter: upper side)
(SP3) “+” wire (gray)
(assist tweeter: upper side)
(SP3) “+” wire (gray)
speaker (2.5 cm) assy
(SP5) “–” terminal
(SP5) “–” terminal
speaker (2.5 cm) assy
(SP5) “+” terminal
(SP5) “+” terminal
4 packing (A)
packing (A)
screw hole (six places)
-0.5 mm from a speaker cabinet upper surface.
Note 1: When installing screws (3.5 × 20),
follow the installing procedure in
the numerical order given.
tightening torque :
1P
Note 2: When installing the tweeter assy, after each screw
holes of the tweeter assy and packing (A) are aligned,
attach it to the speaker cabinet.
Note 3: Check not having overflowed a speaker cabinet
upper surface.
Note 4: Check that there is neither a riding raising to the
speaker cabinet concave portion nor a position
gap of screw holes.
Note 5: Check that packing (A) is not turned over.
Note 10: Be careful not to attach a crack
to a speaker cabinet using the
terminal of a wire.
Note 11: Check that the connection mistake
or insertion of a wire are not
imperfect.
Note 12: Insert the terminal straightly.
Note 13: After terminal insertion, should
Note 12: Insert the terminal straightly.
Note 13: After terminal insertion, should
check acting as lock of the terminal
completely.
Note 14: Check that the caulking
portion of a terminal is
outside
suitable.
Note 14: Check that the caulking
portion of a terminal is
outside
suitable.
caulking portion
caulking portion
5 tweeter assy
Note
6: When installing the tweeter assy,
be careful not to put wires.
Note
7: Be careful not to attach a crack to
the edge of a speaker cabinet.
Note
8: Do not touch the convex part of a
tweeter assy.
Note
9: Check that packing (A) has not
overflowed from a upper surface.
&DXWLRQVZKHQLQVWDOOLQJWKHSDFNLQJ$
:LUHVHWWLQJ
–
8SSHUVLGHYLHZ–
Click on the first or last page to see other SS-NA8ES service manuals if exist.