Read Sony SS-CS3 Service Manual online
SS-CS3
5
1-6. LOUDSPEAKER (13 cm) (WOOFER) (SP2)
total four bosses
2 Insert the jig into the space and slowly
remove the woofer ring.
Note
1:
When using a jig, please work so as not
to injure woofer ring and cabinet assy.
2 Insert the jig into the space and
slowly remove the woofer ring.
Note
1:
When using a jig, please work
so as not to injure woofer ring
and cabinet assy.
and cabinet assy.
Note 2:
When installing the loudspeaker (13 cm)
(woofer) (SP2), make the position of
terminals as shown in the figure below.
3 All bosses are removed while moving
jig in the direction of the arrow, and
woofer ring is removed.
1 four screws
(3.5
(3.5
u 20)
4 woofer ring
6 terminal
(narrow
(narrow
side)
[gray/black]
6 terminal
(wide
(wide
side)
[gray]
5 Pull out the loudspeaker (13 cm)
(woofer)
(woofer)
(SP2).
7 loudspeaker (13 cm) (woofer) (SP2)
terminal (narrow side)
[gray/black]
[gray/black]
terminal (wide side)
[gray]
[gray]
:LUHVHWWLQJ
loudspeaker (13 cm) (woofer) (SP2)
+RZWRLQVWDOOWKHORXGVSHDNHUFP
ZRRIHU63
terminal position
3 All bosses are removed while moving
jig in the direction of the arrow, and
woofer ring is removed.
Click on the first or last page to see other SS-CS3 service manuals if exist.