Read Sony SS-AR2 Service Manual online
SS-AR2
5
2-6. SPEAKER (2.5 cm) UNIT ASSY (TWEETER) (SP4), MOUNT BOARD (TM) ASSY (MBT1)
1 six screws
(3.5
u 20)
2 Remove the speaker (2.5 cm) unit assy
in the direction of an arrow.
3 terminal (+)
(yellow)
(T
(T
+)
4 terminal (−)
(yellow/black)
(T
(T
−)
5 speaker (2.5 cm)
unit
assy
(tweeter)
(SP4)
(SP4)
6
acoustic absorbent
Note
2:
When installing the acoustic
absorbent, make it stick so
that an air layer may not be
made between walls.
7 tapping screw
(BV3.5)
8 mount board (TM) assy
(MBT1)
speaker
terminals
position
terminals
position
Note 1: Check the position
of speaker terminals.
speaker
terminals
terminals
2-7. TERMINAL BOARD
1 two screws
(3.5
u 20)
1 two screws
(3.5
u 20)
2 Remove the terminal board (SP)
in the direction of an arrow.
3 Loosen two torques screws.
Note: Loosen a torques screw or use a
torques driver at the time of bolting.
4 Remove two solders.
6 lead wire (−)
(white/black)
7 accessory nut included
in terminal board (SP)
7 accessory nut included
in terminal board (SP)
8 accessory base included
in terminal board (SP)
8 accessory base included
in terminal board (SP)
9 terminal board
(SP)
(TB1)
0 TERMINAL board
5 lead wire (+)
(white)
Click on the first or last page to see other SS-AR2 service manuals if exist.