SRS-X99 - Sony Audio Service Manual (repair manual). Page 4

Read Sony SRS-X99 Service Manual online

SRS-X99
4
CHECKING  OF  NETWORK  CONNECTION
When replacing the following parts, be sure to carry out the net-
work connection check (wired/wireless).
Target parts:
• 
Complete NETWORK board and Card WLAN/BT combo
 
Note: Be sure to replace the two parts simultaneously.
• 
Complete MAIN board
• 
Rear cabinet assy (Including network antenna) (Ref. No. CAB1) 
(wireless LAN connection check only)
1. Checking the wireless LAN connection
Necessary Equipment:
• 
Access point supporting WPS
Procedure:
1.  Check that network LAN cable is not connected to the unit.
2.  Touch the [?/1] button to turn the power on, and the [LINK] 
indicator blinks in orange.
3.  Check that the [LINK] indicator lights off.
4.  Press and hold the [WPS] button for about 2 seconds until beep 
sound occurs, and the [LINK] indicator blinks in orange.
5.  Press the [WPS] button on the access point.
6.  Wireless LAN connection is completed, and the [LINK] indi-
cator lights up in orange.
Note: Refer to “Operating Instructions” or “Wi-Fi Startup Guide” of this 
unit’s accessories for details.
2. Checking the wired LAN connection
Necessary Equipment:
• Router
• 
Network LAN cable
Procedure:
1.  Connect the unit to the router with the network LAN cable.
2.  Touch the [?/1] button to turn the power on, and the [LINK] 
indicator blinks in pink.
3.  Wired LAN connection is completed, and the [LINK] indicator 
lights up in pink.
Note: Refer to “Help Guide” of this unit for details.
THE  USER  REGISTRATION  DELETION  METHOD  OF  
SEN  SERVICE
By checking device ID, user registration of the SEN service of this 
unit can be force reset.
(Device ID is “the hexadecimal numbers of 12 digits”)
When this unit needs force reset, check device ID and consult with 
the service headquarters.
Procedure:
1.  Check the device ID label stuck on the bottom side of the unit.
2.  Record the device ID indicated on the device ID label by the 
memorandum etc.
 
(Device ID is “the hexadecimal numbers of 12 digits”)
– Bottom view –
Device ID:  XXXXXXXXXXXX
MAC1 :XX-XX-XX-XX-XX-XX
MAC2 :XX-XX-XX-XX-XX-XX
Device ID
Page of 38
Display

Click on the first or last page to see other SRS-X99 service manuals if exist.