Read Sony SCD-X501ES Service Manual online
13
13
SCD-X501ES
SCD-X501ES
R892
R893
IC712
– MAIN Board (Side A) –
4. MODE SETTING FOR SHIPPING
Perform this setting when the EEPROM (IC702) on the MAIN board
is replaced.
Procedure:
is replaced.
Procedure:
1. While pressing the [MENU] button and
. AMS >
jog press
the [POWER] button to turn the power on and enter the Test
Mode and display “DIAG MODE”.
Mode and display “DIAG MODE”.
2.
. AMS >
jog is turned and “8D” is selected.
3.
. AMS >
jog is pressed and “INIT START” is displayed.
4. Then confrm “INITIAL OK” is displayed.
5. Press the [POWER] button to turn the power off.
6. Press the [POWER] button to turn the power on.
7. Press the [MENU] button.
8.
5. Press the [POWER] button to turn the power off.
6. Press the [POWER] button to turn the power on.
7. Press the [MENU] button.
8.
. AMS >
jog is turned and “M/2ch SEL” is selected.
9.
. AMS >
jog is pressed.
10.
. AMS >
jog is turned and “SEL – 2ch” is selected.
11.
. AMS >
jog is pressed.
12. Press the [POWER] button to turn the power off.
Part Location:
Click on the first or last page to see other SCD-X501ES service manuals if exist.