Read Sony SCD-1 / SCD-777ES (serv.man2) Service Manual online
12
REMOVAL OF LOADING ASS’Y AT POWER ON.
Note:
Follow the disassembly procedure in the numerical order given.
SECTION 2
DISASSEMBLY-1
Note
: When the panel (loading) ass’y of this set is closed, you cannot confirm whether the disc and stabilizer ass’y are loaded inside
or not.
Accordingly, perform “Removal of Loading ass’y at Power ON/OFF” (see pages 12 and 13) to remove the disc and stabilizer
ass’y, if loaded.
Accordingly, perform “Removal of Loading ass’y at Power ON/OFF” (see pages 12 and 13) to remove the disc and stabilizer
ass’y, if loaded.
3
stabilizer ass’y
4
disc
2
Press the eject button
to open the panel
(loading) ass’y.
to open the panel
(loading) ass’y.
1
Turn on the power .
panel (loading) ass’y
$
5
four hexagon socket bolts
(M4
(M4
×
8)
8
loading ass’y section
6
Place the front side of loading ass’y on the step
at the rear side of front panel, and raise the rear
side of loading ass’y in the direction
at the rear side of front panel, and raise the rear
side of loading ass’y in the direction
A
.
7
connector
(CN503)
(CN503)
A
5
four hexagon socket bolts
(M4
(M4
×
8)
U.S.A and Canadian Models only
This caution label is located on the rear
enclosure.
enclosure.
CAUTION-
Laser radlation when open.
DO NOT STARE INTO BEAM.
3-976-231-01
Click on the first or last page to see other SCD-1 / SCD-777ES (serv.man2) service manuals if exist.