Read Sony SA-WRT5 Service Manual online
SA-WRT5
9
2-5. FRONT PANEL BLOCK
1
Insert a flat-head screwdriver in two notches at bottom
of the unit, and lift the front panel block a little.
cabinet
3
All bosses are removed while moving
jig in the direction of the arrow, and
front panel block is removed.
front panel block is removed.
3
All bosses are removed while moving
jig in the direction of the arrow, and
front panel block is removed.
front panel block is removed.
5
front panel block
Note
3: When installing the front panel block,
remove the used glue and use a new
glue to fix the front panel block.
4
SUB LED board
connector
(CN7000)
(CN7000)
– Bottom view –
total eight bosses
2
Insert the jig into a space and
raise front panel block.
Note
2: When using a jig, please work
so as not to injure front panel
block and cabinet.
2
Insert the jig into a space and
raise front panel block.
Note
2: When using a jig, please work
so as not to injure front panel
block and cabinet.
front panel block
Note 1: Please spread a sheet under a
unit not to injure cabinet.
Insert only part way.
Insert straight into
the interior.
the interior.
connector
Insert at a slant.
connector
connector
connector
connector
connector
OK
NG
NG
How to install the connector
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
Click on the first or last page to see other SA-WRT5 service manuals if exist.