Read Sony SA-WRT5 Service Manual online
SA-WRT5
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.06
New
1.1
2015.07
Addition of African, Saudi Arabia, UAE, Kuwait, Iraqi, Kenyan, Tanzanian, Nigerian, Brazilian and
Singapore models
Deletion of Part for Ref. No. CN7401 and S7402 on the SUB MAIN board
(SMR-15012)
1.2
2015.10
Addition of Chinese, Argentina and Latin American models
Deletion of Brazilian model
Change of Part No. for Ref. No. C7247 on the SUB MAIN board
(SMR-15020)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.