Read Sony SA-WNT3 Service Manual online
SA-WNT3
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2015.03
New
1.1
2015.05
Addition of Latin-American, Singapore, Russian and Taiwan models.
Change of SUB MAIN and SUB KEY board (Suffi x-13).
Change P/N of Ref. No. 54 in page 26 and 31.
1.2
2015.08
Addition of Argentina model.
Change information of TROUBLESHOOTING in page 11.
Change P/N and description of R7514 in SUB MAIN Board.
Change P/N and description of R7002 in SUB LED Board.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.